• If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!

Search results

  1. yakken

    3D Restoring The Yak

    Saweeeet!!!!!!!
  2. yakken

    The I'm going out flying thread 2016

    Got five more flights on the jtec. A little more tweaking and it will be good to go
  3. yakken

    The I'm going out flying thread 2016

    Yea, i fixed the expo and wrung it out pretty good after that. Its pulling to the gear in any position. I added a degree or so of up thrust last night. Im gonna try it again today.
  4. yakken

    The I'm going out flying thread 2016

    Yea it feels pretty good. This plane has been the biggest pain in the ass i have ever done. Modified a lot of stuff to make it a 3d plane. The maiden flight i was like this is the biggest piece of sh!t i have ever flown. Looked at the radio and realized i only put expo on the left side of the...
  5. yakken

    The I'm going out flying thread 2016

    Did the maiden on the jtec yesterday.have to put a little up thrust in the engine and i think it will be a keeper
  6. yakken

    3D Hinges

    Ok thanks, im learning a lot this winter with the jtec and this TT plane.
  7. yakken

    3D Hinges

    They already have the slots cut on this plane. Just got to glue them in. Do you glue one side of the hinge at a time? For example put all the hinges in the wing and glue them. Then put the aileron on and glue it?
  8. yakken

    So what do you drive ? Show it up .........

    My plane hauler in the summer time and my plane hauler in the winter time. 2005 f250 50,000 miles,2006 expedition 185000 miles
  9. yakken

    3D Hinges

    I hope to be finishing up my jtec this weekend and starting on a new 37.5 TT yak. It comes with flat hinges. Would you guys use those or switch to robarts? if you would use the flat hinges whats your methods of installing them. What type of glue?thanks
  10. yakken

    Show us your bad ass plane!

    Saweeeet!!!!!
  11. yakken

    FAA registration number decals

    You keep getting to go flyin im gonna flip that sumbitch over.[emoji15]
  12. yakken

    IMAC Build: Dalton Extra 300

    I would run the tunnel. You will be surprised at how much that paint will weigh.
  13. yakken

    Aerobeez "BANSHEE" 91" Slick build

    Did you check your servo monitor? You know what happened to me.
  14. yakken

    The 'What did you do in your workshop tonight?' thread

    Got my canopy and hatch done on my jtec yesterday. Today i dug up my yard to get to a broken sewer line[emoji107]
  15. yakken

    Servo torque

    Its 8.5, when i first looked at it i was just converting kg which made it 299oz.
  16. yakken

    Servo torque

    For exampe this servo torque in oz would be right around 118oz correct?
  17. yakken

    Peak Models 32% Extra 330 SC

    Lemme know how you like those servos. I tried to order four from tdrc but they didnt have enough. I was gonna try the bms-2109s.
  18. yakken

    IMAC The new Dalton 300 SP / 330

    Trade ya a knee for an airplane.lol
  19. yakken

    Older 3W and DA for First 40%er

    I seen on another thread were da has used engines they will sell you.
  20. yakken

    The I'm going out flying thread 2016

    Im not gonna say anything[emoji35]
Top