• If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!

Search results

  1. Bluepilot2003

    Sport 30% Edge 540 Pete Marshall Plans with Laser Cut Short Kit

    So the paint that I found closest to match the orange isn't going to cut it. So now I am working on stripping the paint and going to go with all black. It will still look pretty good, just not quite how I envisioned.
  2. Bluepilot2003

    Sport 30% Edge 540 Pete Marshall Plans with Laser Cut Short Kit

    Tonight I was able to cut the cowl to fit. I did have to take quite a bit out of the bottom front to fit the cylinder head and muffler. Then I drilled the holes to mount the cowl. Last I was able to get one coat of paint on. It is looking very promising for a maiden this weekend!!
  3. Bluepilot2003

    Sport 30% Edge 540 Pete Marshall Plans with Laser Cut Short Kit

    Cowl is the Pilot 30% Edge 540. I had them send it to me without any paint but primed already. The wheel pants I got the same way. The canopy is from Fiberglass Specialties. I put the actual part number in an earlier post. It is a 35% Extra 300 canopy. The last two days I have glued all the...
  4. Bluepilot2003

    Sport 30% Edge 540 Pete Marshall Plans with Laser Cut Short Kit

    About 90% done with the covering. Just need a few stripes on the bottom sides of the wings. I did also glue the hinges in for the ailerons already. When I had the plane together for the pic, I weighed it along with the rest of the gear not installed yet. 16.5 lbs dry weight:) I am sure happy...
  5. Bluepilot2003

    Show Me the Biplanes!!!!

    I will probably be in on that project! I just won't be able to start it until after an upcoming deployment. I will be expecting to see a build thread or 4 to give me a little bit of reading while I am gone. That will give me even more motivation to join in;)
  6. Bluepilot2003

    Show Me the Biplanes!!!!

    This thread is killing me! I love biplanes:) I've been looking for an awesome one to build.
  7. Bluepilot2003

    Sport 30% Edge 540 Pete Marshall Plans with Laser Cut Short Kit

    It will not be hard to see! I think it will really stand out compared to most other big planes with not so shiny covering schemes;)
  8. Bluepilot2003

    Sport 30% Edge 540 Pete Marshall Plans with Laser Cut Short Kit

    As I was trying to fit the cowl... It looks like I need to cut openings for the spark plug wire and a little for the cylinder head sadly...
  9. Bluepilot2003

    Sport 30% Edge 540 Pete Marshall Plans with Laser Cut Short Kit

    I had to get the engine on the plane:) I didn't want to wait until it was covered. The zip tie trick for the choke wire is awesome!!! I covered the hatch last night and started gluing the canopy on. To get the fit correctly, I am starting with the front couple inches, waiting for that to dry...
  10. Bluepilot2003

    Sport 30% Edge 540 Pete Marshall Plans with Laser Cut Short Kit

    Thanks. As I was putting the servos in the wing, I was thinking about putting rails on either side of it. That should give a little more support as well if I used some basswood for that.
  11. Bluepilot2003

    Sport 30% Edge 540 Pete Marshall Plans with Laser Cut Short Kit

    First pic was a fun flight last week on a dry lake bed:) I put the control horn slots into the control surfaces this morning. First I mounted the servos to see where the horns needed to be placed. Then I used the template to drill 1/16" holes at the edges of the slots. Then I drilled as many...
  12. Bluepilot2003

    Sport 30% Edge 540 Pete Marshall Plans with Laser Cut Short Kit

    Not a whole lot of progress today since I actually had to go to work;) But I did get the other wing and aileron beveled!
Top