• If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!

Search results

  1. wfield0455

    jeti DS 16 thread

    Thanks for the feedback. I'll give them a try..
  2. wfield0455

    jeti DS 16 thread

    Cam, I have the high tension springs but after increasing the stock spring tension, I haven't bothered to install them yet. Did you ever try increasing teh stock spring tension and now that you've installed the higher tension springs, can you feel a big difference between the two? I've been...
  3. wfield0455

    Fail Safe Question

    It's really about what you feel comfortable with. Since I have receive signal strength telemetry and about as much faith in my equipment as anyone can have in a piece of commercial electronic equipment, I generally set my engine to cut off via both the throttle and ignition kill. If I do go into...
  4. wfield0455

    Titanium gimbals springs

    I don't think the part about hall sensor sticks being damaged by increased spring tension is correct, at least not by damaging pots. I don't believe Hall sensor stick assemblies use any pots and instead detect stick position by the sensors relation to a magnetic field (in the most general of...
  5. wfield0455

    Your Opinion-This is not a "Which radio is best" thread!!!

    Friendly or not, I think the bottom line was they were sick of giving Spektrum a piece of every transmitter they sold in the US. For users, that meant they needed to replace all their receivers if they wanted other than a Spektrum transmitter and at that point, ANY radio system is back on the...
  6. wfield0455

    DX18 Question

    Best you can do is go into the System Menu-> Model Utilities and keep pressing delete model. Unless you have hundreds of them it only takes a couple of minutes..
  7. wfield0455

    jeti DS 16 thread

    In all honesty, I don't think there is any setup that has been done on ANY transmitter that the DS16 can't handle.
  8. wfield0455

    jeti DS 16 thread

    That is a fairly complex setup so I'll keep it fairly general but basically you could do something like the following. In the New Model Wizard, select 2 flaps, 2 ailerons and whatever tail type suits you. This will appear as a Aileron 1, Flap 1, Aileron 2, Flap 2. When you get to the servo...
View older results
Top