• If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!

Search results

  1. TonyHallo

    What beer ya drinking tonight?

    You know the drill, Miller Lite!
  2. TonyHallo

    Scale Wendell Hostetler 30% Piper Cherokee Glass Fuselage Build.

    I started laying up the cowl mold. Put the tooling coat on, yesterday morning followed with a layer of 1 1/2 ounce cloth. When I got back home in the afternoon, the top of the cowl puckered in. I didn't add any reinforcement to the cowl so it is only .025" thick over most of the surface...
  3. TonyHallo

    Scale Sig 1/3 Scale Spacewalker

    I would image with a Plane like the Spacewaker, if you start at one end by the time your get to the other end of the wing that the Titebond will be dry enough to remove the pins.
  4. TonyHallo

    Scale Wendell Hostetler 30% Piper Cherokee Glass Fuselage Build.

    Complete installation.
  5. TonyHallo

    Scale Nelitz 1/3 scale Cub build

    Would like me to measure my Super Cub? It will spread if need. And it has a very nice scale filler strip on the bottom.
  6. TonyHallo

    Scale Wendell Hostetler 30% Piper Cherokee Glass Fuselage Build.

    It's done. The inner surface was polished with sandpaper and WD40 to 800 grit to remove the tool marks, it is about 3/4" longer than the stock venturi. Working on the cowl mold as well, it it ready to begin molding, all waxed and PVA applied. Once the new cowl is complete I can mount the...
  7. TonyHallo

    Scale Wendell Hostetler 30% Piper Cherokee Glass Fuselage Build.

    That is the smallest boring bar that I have and it just barely fits in the T(.360") letter drill hole. The compound on the small lathes sucks as well. It is a 7 degree taper 1 1/2" long, the radius is 1/4" diameter. I have no bench mark to compare the performance just hoping for the best...
  8. TonyHallo

    Scale Wendell Hostetler 30% Piper Cherokee Glass Fuselage Build.

    Almost complete, made a lot of chips.
  9. TonyHallo

    Scale Wendell Hostetler 30% Piper Cherokee Glass Fuselage Build.

    Been whittled away at the velocity stack. First off made a fixture plate to hold the part,
  10. TonyHallo

    Scale Wendell Hostetler 30% Piper Cherokee Glass Fuselage Build.

    Pickup the 48"x 48"x 6" piece of 1 pound virgin expanded bead polystyrene today that hopefully will become the wing cores. The cost was $53.00. The factory is about an hour from my home. The last time I bought foam from there was in 2003 when building a Hurley Extra 300.
  11. TonyHallo

    Scale Nelitz 1/3 scale Cub build

    Windshield
  12. TonyHallo

    Scale Nelitz 1/3 scale Cub build

    Remember the old days making control rods out of 1/4" balsa, 2-56 threaded rods wrapped with thread and soaked with CA?
  13. TonyHallo

    Scale Sig 1/3 Scale Spacewalker

    Hey Randy, welcome to GSN! A build would be great. Wonder if the 38 cc will be up to the task? I image the recommended engines on the SIG site are glow?
  14. TonyHallo

    Scale Nelitz 1/3 scale Cub build

    Is that a solid rod? What control?
  15. TonyHallo

    Scale Nelitz 1/3 scale Cub build

    Are you missing a radius where the fuselage meets the fin? Looks like in the above photo.
  16. TonyHallo

    Scale Wendell Hostetler 30% Piper Cherokee Glass Fuselage Build.

    Quick update on the carburetor modification. The clone carb I bought had a 17MM choke diameter, I found a 17 mm velocity stack Ebay for $8 so I bought it. The original carb has a 9 mm diameter velocity stack. Looking at the 17 mm velocity stack on the new carb with the choke open just looks...
  17. TonyHallo

    Scale Wendell Hostetler 30% Piper Cherokee Glass Fuselage Build.

    Sanding away on the cowl and finishing up the stabilator. Turned 3/4" dowel down to fit inside the cf tube on both ends, these were glued in with thin CA. The stabilator tips are fitted with 1/4" lite ply plates, an additional piece of 1/4" lite ply was glued over the socket area, a 4-40 bolt...
  18. TonyHallo

    The 'What did you do in your workshop tonight?' thread

    Wonder who came up with the idea? It sure does work great.
  19. TonyHallo

    Scale Wendell Hostetler 30% Piper Cherokee Glass Fuselage Build.

    From Google AI; " A Walbro spiral diaphragm kit's primary benefit is its enhanced durability compared to traditional rubber diaphragms, offering resistance to fuel deterioration, ethanol damage, and extended lifespan, making it ideal for applications with modern fuels; however, potential...
  20. TonyHallo

    Scale Wendell Hostetler 30% Piper Cherokee Glass Fuselage Build.

    Need to get the cowl ready to mold. The oval below the engine centerline where the headlamp is located was off to the left side by 1/8", cut it free and moved it over to the center According to Aircraft Spruce the 140 has a 12" diameter spinner, 30% of 12 is 3.6" 3 1/2" is close enough. The...
View older results
Top