Search results
-
Aerobeez 64" 20% Scale Electric Conversion MXS-R At Joe Nall 2015
A buddy of mine runs a DA70 on his 91" EF Extra and he used a 32oz tank. Still flies real light, but he can get half an hour out of it mostly at WOT. Would be an awesome setup for a 93" Extra (or a 91" Slick... hint hint :popcorn: ).- Xpress
- Post #35
- Forum: Aerobeez.com
-
-
The I'm going out flying thread 2016
Some 3D huckin in the 15mph wind!!!- Xpress
- Post #2,260
- Forum: Giant / Scale RC General Discussions
-
Aerobeez 70″ Slick PRO Step By Step Build Guide
https://www.youtube.com/watch?v=G0n65hQG0kY&feature=youtu.be Video #2!!!!!- Xpress
- Post #338
- Forum: Aerobeez.com
-
Aerobeez 70″ Slick PRO Step By Step Build Guide
https://www.youtube.com/watch?v=-nhbSeNE7Lg&feature=youtu.be Windy day, about 15 down the runway! Doesn't really bother me though, just more fun to play in. Comfortably getting 6 minutes of hucking in. May extend that to 6:30 since my packs are coming down around 3.78v/cell.- Xpress
- Post #336
- Forum: Aerobeez.com
-
The I'm going out flying thread 2016
Got 5 solid flights in today with the 70" Slick. Really really liking this airplane. Settles down into rock solid harriers so nicely.- Xpress
- Post #2,247
- Forum: Giant / Scale RC General Discussions
-
Aerobeez 70″ Slick PRO Step By Step Build Guide
Definitely pro's at derailing threads ;) I flew the Slick today with the new Thunder Power pack. I only managed 2 flights on it, and TP advises not going below ~50% for the first handful of flights, but already I can tell this pack is going to be killer. It had so much power in the air, and...- Xpress
- Post #329
- Forum: Aerobeez.com
-
Aerobeez 70″ Slick PRO Step By Step Build Guide
Yes, but I used the longer HD arms. It turned out to be plenty for me with the throws turned up a bit on all of the servos. I may fit a 3" aluminum arm onto the rudder and I may fit Dubro long HD arms to the ailerons but otherwise the stock long HD arms work great. The HD arms are the thicker...- Xpress
- Post #319
- Forum: Aerobeez.com
-
Mini How-To Proper LiPo battery disposal thread
You're very welcome :thumbup: Glad to share my wealth of knowledge anytime. To further expand upon brine solution discharging- it can work if you submerse just the main leads of the pack into the solution as it will act like a resistor and slowly discharge the pack. But the NiMH discharger...- Xpress
- Post #4
- Forum: Batteries / Chargers / Power Supplies
-
Aerobeez 93" 32% Extra 330SC At Joe Nall 2015
Some great, smooth, gutsy, nitty gritty 3D :thumbup:- Xpress
- Post #2
- Forum: Gas Engines
-
Aerobeez 70″ Slick PRO Step By Step Build Guide
What a coincidence, because the Aurora 9X is just under $400!!! http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXDHVU&P=ML ;) :)- Xpress
- Post #317
- Forum: Aerobeez.com
-
Mini How-To Proper LiPo battery disposal thread
Hi all! I figured I would make a little writeup on the proper and safe disposal of a damaged or dated LiPo battery. But first, let me clear some confusion here: Salt Water Method: This method has been passed around for a long time, ever since the first lipo packs hit the market for hobby...- Xpress
- Thread
- Replies: 4
- Forum: Batteries / Chargers / Power Supplies
-
Aerobeez 70″ Slick PRO Step By Step Build Guide
I work for Hitec, so that would be a no ;)- Xpress
- Post #314
- Forum: Aerobeez.com
-
The 3DRCForums -Discuss Anything Thread-
Ever find any power beads for the same year bug?- Xpress
- Post #7,940
- Forum: Giant / Scale RC General Discussions
-
The 'What did you do in your workshop tonight?' thread
Need to get back down in my shop and keep tidying it up before someone else puts more junk down there :eek: Thinking about re-doing my shelving system, as in removing them from their current location and fitting them elsewhere since they are placed ontop of a counter top, occupying valuable...- Xpress
- Post #509
- Forum: Giant / Scale RC General Discussions
-
Aerobeez 70″ Slick PRO Step By Step Build Guide
Not sure if I mentioned this earlier but it's a tip I like to use when I have to make clean cutouts for servos or cables, and it's a method I used on the Slick throughout the build. It's why my Slick looks so slick ;) First, you need to have an adjustable soldering iron, I have a Hakko FX888D...- Xpress
- Post #311
- Forum: Aerobeez.com
-
Aerobeez 70″ Slick PRO Step By Step Build Guide
Anyways... Getting excited to get out and test my new pack on Saturday!!! Need to swing by the LHS tomorrow after work and grab some EC5's...- Xpress
- Post #309
- Forum: Aerobeez.com
-
PAU at XFC 2015
That's our Spencer!!! My money is on him... (winning)- Xpress
- Post #7
- Forum: Giant / Scale ARF Build Threads
-
Parallel Charging Pros and Cons
Yes I've had my iCharger long before I worked for Hitec. It's a reliable charger, don't see the need to get rid of it right now. I've seen both fail. When stuff comes from China, anything can happen. I wonder what kind of current figures my power supplies would draw if I were to run my...- Xpress
- Post #24
- Forum: Batteries / Chargers / Power Supplies
-
Servo problem
Yes. When an ESC loses sync with the motor, it can make all kinds of noises. The loud knocking noise could be the ESC sending a signal to the motor just a fraction of a second before the motor gets to the right point so it actually forces the motor to slow for a split second. Double checking...- Xpress
- Post #29
- Forum: RC Radio Systems