• If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!

Search results

  1. AKNick

    91" SkyWing ARS 300 Assembly Thread

    I tried to fit nordlocks as well, but they are wider than the hole. I really am a big fan of this method as well.
  2. AKNick

    91" SkyWing ARS 300 Assembly Thread

    Slapped the mufflers on. Copper RTV on the bolt threads and a thin coat on the muffler mating surfaces.
  3. AKNick

    91" SkyWing ARS 300 Assembly Thread

    Some wire routing. Used the foam wire standoffs for the ignition wires. Turned out pretty nice. I don’t know if I showed this or not. There is a foam insert with holes for the fuel tubing and wires to pass through. Kinda neat! I used the rubber grommet where the ignition module is on the...
  4. AKNick

    91" SkyWing ARS 300 Assembly Thread

    Made a little opening in the cowl for the needle access. Used a little sippy straw and taped it to the needles, trimmed to length until it almost touched the cowl. Could see through the cowl to mark it and make an oblong hole.
  5. AKNick

    91" SkyWing ARS 300 Assembly Thread

    Throttle linkage complete. Tried using the geometry guide as best I could. I cannot bring myself to let the servo arm go to zero degrees. As I move the throttle I can tell the carb arm moves quicker as it gets to the top. So I know there is some geometry creating a mechanical throttle curve...
  6. AKNick

    Yippee! What the postman brought

    Very Nice!
  7. AKNick

    110" TIMBER Assembly Thread

    Ha!! Man, an electric plane no problemo! New gas engine on a heavy plane.... yeah I’m not going to take my chances. :wink: The Timber has hovered on low rates far above the trees at around half throttle. I could tell it was nose heavy and the tail was all over the place ha ha. Got better as I...
  8. AKNick

    91" SkyWing ARS 300 Assembly Thread

    Got my throttle servo in place. Not too shabby for geometry. My servo wires are all in place. Just need to make a linkage.
  9. AKNick

    91" SkyWing ARS 300 Assembly Thread

    Well after grinding I soon realized that my glass skills are lacking... and the opening was too narrow. So in my defeat, I did it all over again and wrapped my pvc tube in some material to make it thicker. End result was much better. I’ve probably somehow made everything worse by doing this but...
  10. AKNick

    110" TIMBER Assembly Thread

    Thanks guys!
  11. AKNick

    110" TIMBER Assembly Thread

    It's getting used to it's new home!
  12. AKNick

    110" TIMBER Assembly Thread

    Video!
  13. AKNick

    Scale Don Smith P-51 Mustang

    Boy U be dreamin! Might need to get your self a P-Fiddy Stick Plane and make some roaring whistles :too-happy:HA HA! Isn't the whistle from the scoop? You may need to get a Mr. Sound system for the Blazing Guns.
  14. AKNick

    RC Airplane Memes

  15. AKNick

    110" TIMBER Assembly Thread

    Got a couple more flights on this baby yesterday. Flew better with the tank further back, stall was less violent. Still will slowly drop a wing, slow down and then begin to spiral if you don't give the stick inputs to recover. Moving the CG back was key. I am considering adding the LE devices...
  16. AKNick

    Awesome Video Thread

    Sweet! Thanks for sharing!!!
  17. AKNick

    91" SkyWing ARS 300 Assembly Thread

    Been scratching my head which throttle servo to use PM DS305 or Savox 1267. I’ve heard mixed feelings on every brand and shoot... I’m just going to pick one and fly it. Found a servo box in my collection, modified and painted it, added some anti-vibration tape in it, and epoxied it in place...
  18. AKNick

    110" TIMBER Assembly Thread

    Could be a factor for sure. Lots of tail draggers handle differently with large bush tires. The geometry changes in relation to the CG and the tail will be less responsive on the tail and will walk away from you. Maules have quite the short coupled tail and ground loop easy with a less...
  19. AKNick

    I’m going out flying thread 2019

    More like two days worth of flying... but still!!
  20. AKNick

    The 'What did you do in your workshop tonight?' thread

    What did I do? Not enough!!! Need more shop time!!!! One plane being built, one with a vaporized bullet connector, another with CG rearrangement shinnanigins. Plus I’ve got another with a busted cowl, and one with a busted prop. Ha ha. I guess this means I’ve been flying??
Top