• If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!

Search results

  1. TonyHallo

    Mini lathe (and mill) discussion.

    I only put the compound on when necessary, my quick change tool post normally resting on a solid mounting post. What lathe do you have? It's a Vevor, correct? They seem to be priced reasonable without many options, I suspect most who buy convert it to CNC so why pay for options that will be...
  2. TonyHallo

    Mini lathe (and mill) discussion.

    Prototype definition: "a first, typical or preliminary model of something, especially a machine, from which other forms are developed or copied" Developed is the key word here.
  3. TonyHallo

    Scale Bud Nosen 1/4 Scale Cub?

    The fin and stab area are a PITA for sure.
  4. TonyHallo

    Mini lathe (and mill) discussion.

    Work more on the cross slide interlock today. Built a bracket to support the bell crank, made the bell crank and interconnecting link. Just need to connect the bell crank to the cam lock and it will be functional. I decided that I want to move the cam lock handle to the 45 degree position...
  5. TonyHallo

    Mini lathe (and mill) discussion.

    I wanted to put the DRO on the tail stock side but it would have limited the tail stock travel to the work and access to the carriage lock. It fits under the 4" three jaw chuck without a problem as long as the jaws are not sticking out too far. I really need to be careful when the 6" four jaw...
  6. TonyHallo

    The 'What did you do in your workshop tonight?' thread

    The stab and fin are a pain in the asre for sure.
  7. TonyHallo

    Scale Bud Nosen 1/4 Scale Cub?

    Looking great.
  8. TonyHallo

    Mini lathe (and mill) discussion.

    Wasn't a lock provided?
  9. TonyHallo

    Mini lathe (and mill) discussion.

    I need to make the linkage and bell crank to connect to the cam operated carriage lock, the cam lock took another day and half to sort out. It is in the free position on the top photo and locked on the bottom photo. You really need the carriage lock on these small lathes as the there no mass...
  10. TonyHallo

    Mini lathe (and mill) discussion.

    I spent the better part of today making this arm for the carriage lock interlock. The top photo allows longitudinal feed while the second photo it is blocked. It is very robust, don't believe it will bend in use.
  11. TonyHallo

    Scale Nelitz 1/3 scale Cub build

    That's great news. I would worry about the Pam and epoxy resins mixing but if it works for you then that all that matters.
  12. TonyHallo

    Mini lathe (and mill) discussion.

    Been doing some work on my lathe. Made an interlock device to prevent the cross feed and longitudinal feeds from engaging together, decided I needed one for the carriage lock and longitudinal feed. It is still a work in process. Below the cross feed is engaged and the plunger is extended...
  13. TonyHallo

    Scale Nelitz 1/3 scale Cub build

    The mold has 10 coats of Partall #2 wax on it. I never tried relying on the wax alone and have always used PVA. When the part comes out of the mold the PVA normally comes with it. I have used Pam for release agent for Ultracal 30, don't believe I would use it for resin though. Put a drop of...
  14. TonyHallo

    Scale Nelitz 1/3 scale Cub build

    The Super Cub has fuel tank covers, I decided to hide the flap and aileron servos under the covers.
  15. TonyHallo

    Scale Nelitz 1/3 scale Cub build

    Tell me which arm did you shorten? Top or bottom? I went back and looked at the Super Cub photos and I had to shorten the bottom horn. The front side is going to the bottom of the aileron, if you zoom in you can see it is moved in one hole on the horn. I do remember the cables remained...
  16. TonyHallo

    Scale 1/3 Scale Extra 330L Build.

    Well then you need skates rather than skies for your plane.
  17. TonyHallo

    Scale Nelitz 1/3 scale Cub build

    A piece of KS brass tube makes a great axle captured between two pieces of plywood. For the mold, it is already waxed. I use PVA for release film but there are easier products to use. I understand Loctite 700-NC works great, 700-NC . I plan to purchase this product next. Cut a piece of...
  18. TonyHallo

    Scale 1/3 Scale Extra 330L Build.

    Get out the snow skis.
  19. TonyHallo

    Scale Nelitz 1/3 scale Cub build

    The package was delivered on 2/21/23 at 3:42 pm?
  20. TonyHallo

    Scale 1/3 Scale Extra 330L Build.

    What's going on In Canada with your air fields?
Top