• If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!

Search results

  1. TonyHallo

    Scale RCM 1/3 Scale Champ Build

    Check it out . I don't know, wonder what a reasonable cylinder head temp might be? Easy to change if need be. I emailed Roto and got no response some time ago.
  2. TonyHallo

    Scale RCM 1/3 Scale Champ Build

    Before painting the fuselage the weight 36 pounds and the CG was 6 5/8"back from leading edge. Weighted the finished plane today and it came in at 39.8 pounds and the CG is now 6 3/4" behind the leading edge, this results in a static margin of 6%, I'm good with it. Based on the weight an wing...
  3. TonyHallo

    Scale 20cc DHC-2 "Beaver" Kit Build from Moustache Model Works

    I seem to remember preparing the surface with steel wool rather than sanding.
  4. TonyHallo

    Scale RCM 1/3 Scale Champ Build

    Spent the better part of the day messing with telemetry. I want to measure three temperatures, each cylinder and the ignition module, According to the instructions the ignition shuts down at 140F, wonder who came up with that scheme? Every device I came across does 2 temperatures. I found...
  5. TonyHallo

    Scale 20cc DHC-2 "Beaver" Kit Build from Moustache Model Works

    Ironed about the size of dime in a circular motion, Must be a night owl, what time is it and Alaska?
  6. TonyHallo

    Scale 20cc DHC-2 "Beaver" Kit Build from Moustache Model Works

    When I did Monokote over glass many years ago I stated in the middle and used stretch rather than shrink, iron heat turned all the way up, two people may help tugging on the covering. It works with Monokote I know, at the time was told that Ultrakote did not work as well. Ironically Ultrakote...
  7. TonyHallo

    Scale 20cc DHC-2 "Beaver" Kit Build from Moustache Model Works

    Are you putting the plane on the floats or wheels?
  8. TonyHallo

    Scale RCM 1/3 Scale Champ Build

    Added details to the cowl. Air cleaner. Used element from a B&S mower filter. I looked at many photos on Airliners.net and couldn't decide how to make the filter, finally Googled the replacement part and came up with this photo.
  9. TonyHallo

    Scale Nelitz 1/3 scale Cub build

    You are correct, many folks lost out last year, what a shame.
  10. TonyHallo

    Scale Nelitz 1/3 scale Cub build

    Yes Congrats!!! Is he the engineering major?
  11. TonyHallo

    Scale RCM 1/3 Scale Champ Build

    I converted my first fixture over with tubes. When I found the Honeywell fixtures at Sam's club they were cheaper than my conversion so I pitched all my fixtures, I don't think those tubes will work in the current fixtures. Thank you for the info. The icing has already started this morning.
  12. TonyHallo

    Scale RCM 1/3 Scale Champ Build

    Well my wife's arm is back together and I did manage to sneak in a little work between ice bag changes. The seats are OK but I still looking for other ways to do this. I may wet sand again and apply more paint. It will work until something better comes along. My lighting is poor because...
  13. TonyHallo

    Scale RCM 1/3 Scale Champ Build

    Put a coat of semi gloss black on the frames and a slighter darker gray on the seat cushions. I plan to wet sand and shot the cushions again, I think they will look fine.
  14. TonyHallo

    Scale RCM 1/3 Scale Champ Build

    Spent some time on the seats today. I got the seat from i Fly Tallies but it just doesn't match the decor of the Champ so I will use it on a future project. I added the cross straps on the seat frames. The tin came from a gallon of WD40, nice and thin, sharp as a razor! The seat cushions...
  15. TonyHallo

    Scale Nelitz 1/3 scale Cub build

    That should make for interesting field assembly!
  16. TonyHallo

    Yippee! What the postman brought

    I was looking for a new radio, considered the X20, I think I read every post on the RCG forum, decided to stay with the Taranis 2019 SE. Can't image anything easier than setting up a new plane in Companion. I'm sure ETHOS will get there some day but I'm too old too wait! I sure you will be...
  17. TonyHallo

    Scale RCM 1/3 Scale Champ Build

    If I had it to do over, I would buy paint masks from AeroGraphics.com rather than mask myself. Maybe the next build? Still kicking around what to build next? Might finish the Super Cub that I've been moving around the shop for a while?
  18. TonyHallo

    Scale Nelitz 1/3 scale Cub build

    The main spar ends will bolt to the connection point in the center of the cabin? How about the rear spars?
  19. TonyHallo

    Scale RCM 1/3 Scale Champ Build

    Started cleaning the bleed through on the wings today, before and after of the top number 8.
  20. TonyHallo

    Scale RCM 1/3 Scale Champ Build

    I don't want to think about it. I couldn't get the original buck out of the mold so it was destroyed. I got a good mold that i can work with, it needs a little work due to damage sustained while removing the buck, that's OK. My wife is having surgery on Friday to joint her left humerus as one...
Top