stangflyer
I like 'em "BIG"!
Kewl... where'd ya get the brakes? I needs me sum!
Scale 35% Krill Extra 330SC....CUSTOM-ARF!!!
- Thread starter Pistolera
- Start date
Pistolera
HEY!..GET OUTTA MY TREE!
Ahhhh... made them....and they're fake! So won't do much good stopped anything...lol
Snoopy1
640cc Uber Pimp
Ok that is cool nicely done. You have a lot more patience than I do.
Bartman
Defender of the Noob!
it's right around the corner, I'm thinking about it every day!
Pistolera
HEY!..GET OUTTA MY TREE!
Not much to report (at least not worth pics). Lots of wet sanding, fill, sand some more, repeat. With each piece of sandpaper I'm getting closer to painting.
Getting an exhaust fan and filtration system set up in my shop. Paint "booth" construction materials on hand. Hope to be doing some primer work next week. Got a couple of buddy's cowlings and canopies to do first, so I'll get things fine tuned and get some practice on their stuff before I start on the Krill
.
I want to say I can see the light at the end of the tunnel....but don't wanna jinx myself
. When I got back into the sanding stuff I remembered why I shelved this project a few years ago! Well that and buying property, building a house, moving, etc....
Getting an exhaust fan and filtration system set up in my shop. Paint "booth" construction materials on hand. Hope to be doing some primer work next week. Got a couple of buddy's cowlings and canopies to do first, so I'll get things fine tuned and get some practice on their stuff before I start on the Krill
.I want to say I can see the light at the end of the tunnel....but don't wanna jinx myself
. When I got back into the sanding stuff I remembered why I shelved this project a few years ago! Well that and buying property, building a house, moving, etc....
49dimes
Damn I'm hungry
That might not be as hard as you think Earle. Back when I was into the 1/5th scale FG cars I had a 50cc stadium truck I had put full hydraulic actuated disk brakes on. With a plane that size I see it being very feasible.
Snoopy1
640cc Uber Pimp
Can you add something to the picture to show the scale and or size , thanks.
49dimes
Damn I'm hungry
The picture is about 20% smaller than actual size. The disc diameter on the ones I had was 54mm or about 2-1/4". The hydraulic lines are 1/8" OD poly tubing. Integy makes some really nice ones too and they come in assorted colors....They also appear to have hose couplings on their hydraulic lines...pretty
. Don't know the actual size of the Integy. The add said for 1/5 scale Baja 5B. And looking at the calipers it looks as if you can install the hydraulic lines perpendicular or parallel to the caliper and use either port for bleed. 
