35CC 3D Plane
- Thread starter Abrams
- Start date
gyro
GSN Contributor
I've never had to wait more than 2 days for them to return a phone call.
And as a bonus, they're also on this forum!
[MENTION=1155]Fromeco[/MENTION], can do drop by to answer a question?
on my switches, the wires for the deans input are a larger guage than the jr plug output wires. also, I believe the connector surcharge results from both the labor involved, and the fact fromeco uses genuine Deans plugs vs. counterfeits that are popular elsewhere.
hone
150cc
That reminds me of the first time I called fromeco. They didn't answer and I didn't bother leaving a message cause I just wanted to change the color of my switch(which wasn't a huge deal). I believe it was Mike who called me back(within the hour). I was shocked to get a return call when I didn't even leave a message. I got the switch changed and will be a customer for life 
Last edited by a moderator:
In their contact info, it was just funny the way they stated it. If you're counting on an immediate call back... this ain't the place .
I'm debating still. There is a local place, electrodynamics, that sells 10amp switches. I'm sure that would be sufficient. I do like the Badger though. I would like to get this wrapped up this weekend, but don't have the battery yet anyway.
I'm debating still. There is a local place, electrodynamics, that sells 10amp switches. I'm sure that would be sufficient. I do like the Badger though. I would like to get this wrapped up this weekend, but don't have the battery yet anyway.
This is what I ended up with for a switch. It's one of the two toward the bottom of this page It's just a simple 10amp switch.
http://electrodynam.com/rc/usw/index.shtml
The guy that designs and manufactures these is a member of the club I belong to. He holds a masters degree in aeronautical engineering. Really nice guy.
http://electrodynam.com/rc/usw/index.shtml
The guy that designs and manufactures these is a member of the club I belong to. He holds a masters degree in aeronautical engineering. Really nice guy.
Building my dle30 velox with a boomarc hidden pin switch and tech aero ibec. Plan to have batteries mount behind air exit on a tray I built from 1/8" hobby ply. Running 4-5565 for control surface and 1-5665 throttle. So far setting on tcurve at 0-8-22-35-66 prolly need to flatten in middle somewhere but I see no rpm gain after 57 and servo travel was setup from fully closed no idle screw to fully open. Batts I have to use are glacier 2s2600. Only mods I have done are adding a piece of 3/16 ply behind firewall to achieve required thickness a battery tray in bay behind canopy and canopy bolt tabs! Happy flying plan to maiden Saturday 9-6-14!
Enterprise
150cc
What weight did yours come in at?