3D Newbies

[3dNater]

Welder's is my favorite. Basically contact cement in a handy tube applicator. Somewhat hard to find.

[MENTION=2237]3Drew[/MENTION] if you like Welders you are really going to love foam tac. It works the same as welders but doesn't turn yellow and become brittle. [MENTION=3014]AKfreak[/MENTION] just put my new 39" crack yak together with it and I love how it turned out. I bought the tube used on my yak at hobby people here in Las Vegas. It is a little more money at $12 for 2 oz but seems to be worth it.

 

[Bloosee]

[MENTION=2237]3Drew[/MENTION] if you like Welders you are really going to love foam tac. It works the same as welders but doesn't turn yellow and become brittle. [MENTION=3014]AKfreak[/MENTION] just put my new 39" crack yak together with it and I love how it turned out. I bought the tube used on my yak at hobby people here in Las Vegas. It is a little more money at $12 for 2 oz but seems to be worth it.View attachment 28410

I only use Welders when the joint needs the maximum amount of strength. It turns yellow within 3-4 month. I love Foam Tac as well, nearly as strong. I'm also using BSI Foam-Cure for joints that aren't critical. The Foam-Cure is nice (cheap and easy to work with) but its definitely not as strong as Welders and FT.

 

[Flyboy]

Just got my stuntmaster today! I thought my AR6210 receiver would work in this model but after getting it I'm starting to have second thoughts. What spectrum receivers work well with this model?

 

[SnowDog]

what is your concern about the RX that you have?

 

[Flyboy]

My only concern is its size and weight.

 

[ЯК Attack]

Unless you're flying competitive F3P, any reasonably sized receiver will do
This is my favorite foamy Rx.
Name dropping TH once again, but I can't help it.

 

[3dNater]

Just got my stuntmaster today! I thought my AR6210 receiver would work in this model but after getting it I'm starting to have second thoughts. What spectrum receivers work well with this model?

I have a used ar6100e I'll sell you for $5 shipped if you want one.

 

[ЯК Attack]

One other thing, sometimes removing your Rx from its case is an option for shedding weight depending on how it is constructed.

 

[Lojik]

Too many models I want - gonna have to save up for this one.

 

[alawson999]

[MENTION=2237]3Drew[/MENTION] - I used that RX in several 3d profiles also - no problems at all. I tend to fly well within "park flyer" distances. Would suggest a care full range check if flying far away or high up.