3DHS 126 AJ Slick

[RotorJockey]

Let's start with the digits off the website:

Specifications
Wingspan: 126"
Length: 119"
Wing Area: 2900 sq.in.
Weight (RTF): 42-46 lbs


Recommended Components
Engine: Desert Aircraft DA-170 or DA-200
Servos: Hitec HS-7955TG



Alternate Components
Engine: DLE-222
Servos: Hitec HS-7950TG


Required to Complete
All Electronics (See Recommended Components)
Extensions: 4x 60" Heavy Duty
2x 36" Heavy Duty
2x 24" Heavy Duty
2x 18" Heavy Duty
4x 12" Heavy Duty

Hardware: 5.5" Spinner
2" Servo Arms
Mejzlik 32x14 Propeller

Adhesives: Thin CA
5-30min Epoxy

 

[RotorJockey]

I'm putting together the components for mine and I'm kinda changing it up a bit!

I'm going to run a DLE 222 engine with a Vess 32A prop and cf spinner.

6X HS-5995TG's in the wings

4x HS-5995TG's in the elevators

2x HS-M7990TH's on the rudder, push-pull in the tail

HS-985MG for the throttle

SmartFly EQ6 Turbo Plus

52oz Fiji water bottle w/ Fox fuel cap

 

[RotorJockey]

All I have left on my shopping list is:

The prop, the 2 rudder servos, the remainder of the SWB arms, and of course, the engine.

 

[RotorJockey]

Gonna use servo wire and computer connectors to make my own quick-connectors for the wings.

 

[Joe's Dad]

Like these alot

20 AWG Dual Servo Extension Multiplex Harness 12" Male/Female

http://www.taildraggerrc.com/servos-and-servo-extensions.html

 

[Blucor Basher]

Guess it's time to update the engine recommendations. The Fox200 was fun while it lasted, but they didn't sell them for very long. I'd say currently the two best choices are the DA170 and DA200, along with the DLE222.

 

[RotorJockey]

Guess it's time to update the engine recommendations. The Fox200 was fun while it lasted, but they didn't sell them for very long. I'd say currently the two best choices are the DA170 and DA200, along with the DLE222.

OP updated!

 

[RotorJockey]

Like these alot

20 AWG Dual Servo Extension Multiplex Harness 12" Male/Female

http://www.taildraggerrc.com/servos-and-servo-extensions.html

Yeah, looked at those things real close but couldn't really figure out whether or not they were right for me based on the the pics. They should take some better pics showing them in action!

Fred

 

[RotorJockey]

Jim & Joe's "In Action" link:

http://www.youtube.com/watch?v=PxzgXF-d36s&feature=player_embedded

Jim & Joe's pics site:

http://3dhs126ajslick.shutterfly.com/

Hope you don't mind, Jim!

 

[Enterprise]

Yeah, looked at those things real close but couldn't really figure out whether or not they were right for me based on the the pics. They should take some better pics showing them in action!

Fred

I have them in my H9 Extra. They are real nice. I did the two different lengths and used a short and long on each side opposite so I can't hook them up backwards. The two shorts won't reach each other. I'll try to snap a pict next time I have it out.