71" AJ Slick Building, Flying, and Questions

[3dNater]

If you get stuck post a pic and we will set you straight.

 

[rcpilot_971]

Just un boxed my 71 slick
Im planing on going with a 4330 on 6s.
would I be able to get proper CG with the rudder servo in the tail with a 6s setup

 

[gyro]

Just un boxed my 71 slick
Im planing on going with a 4330 on 6s.
would I be able to get proper CG with the rudder servo in the tail with a 6s setup

With a big enough pack pushed forward... Yes. Use a 6s6000 or so just to be safe.

 

[Manta]

I think so. 4430 is a little heavier than the 4325 so tjat will offset the rudder servo in the back. Lotsa room for battery adjustment

 

[Pete]

Just un boxed my 71 slick
Im planing on going with a 4330 on 6s.
would I be able to get proper CG with the rudder servo in the tail with a 6s setup

Hi rcpilot_971. Could you be so kind to let me know where I can purchase a Motorfly 4430 or 4330 outrunner please? Or if anyone knows please post. I have a new project and burned too many of my own motors already. Thanks everyone!

Regards,

Pete

 

[3dmike]

Hey Pete we would suggest Subsonic Planes as they design and build the Motrofly motors in house!

http://www.subsonicplanes.com/Motrolfly_Motors.html

 

[skibum44]

Yep Ken has great service to and could wind them to what ever you need. My 4330-216 has been in service for nearly two years and has over 700 flights on it. Tested it last weak and it pulled 23lbs 6oz and settled in close to 23lbs. Always runs cool for me to.

 

[Pete]

Hey Pete we would suggest Subsonic Planes as they design and build the Motrofly motors in house!

http://www.subsonicplanes.com/Motrolfly_Motors.html

Thanks Mike!

 

[rcpilot_971]

anyone put a DA-35 on this plane ??

 

[SnowDog]

anyone put a DA-35 on this plane ??

not me, but I've heard of others doing so.

I've got an OS GT 33 on mine and it flies superbly, I would imagine the DA-35 would do the same.