78'' Extra

[wedoitall]

hope these are on the next container and nothing drastic $$$ wise comes up.

 

[dth7]

DLE 35 is Piped and ripping a Hover 20X6 at about 8700 rpm! Going to run through the rest of my Air cooled Penzoil mix then start on Stihl Ultra. Gained about 800-900 rpm with same prop. Think I'll be propping to a 20x7 or 8 to get it more manageable. Starting to get comfy with the airframe now.

 

[hone]

DLE 35 is Piped and ripping a Hover 20X6 at about 8700 rpm! Going to run through the rest of my Air cooled Penzoil mix then start on Stihl Ultra. Gained about 800-900 rpm with same prop. Think I'll be propping to a 20x7 or 8 to get it more manageable. Starting to get comfy with the airframe now.

Sounds like there is a lot of power there! You'll probably want to go to at least the 20x8.

Snap a pic or two if you can :thumbup:

 

[YellowJacketsRC]

DA 35 coming in about 8 weeks!

 

[Enterprise]

That is like the boy who cried wolf. DA's time estimates for release are as optimistic as Obama Care.

 

[dth7]

Just ordered a Xoar Sword 20x8. Anyone have any experience with them? Wanted a Hover CF but VV doesnt have any 20x8. Will try to post photos and some vid soon.

 

[gyro]

Just ordered a Xoar Sword 20x8. Anyone have any experience with them? Wanted a Hover CF but VV doesnt have any 20x8. Will try to post photos and some vid soon.

I've used the 23x8 sword with no problems, it's a nice prop. The PJD seems a little stiffer.

 

[dth7]

i've used the 23x8 sword with no problems, it's a nice prop. The pjd seems a little stiffer.

pjd?

 

[gyro]

Laminated

 

[dth7]

Laminated

Oh. Ok! Thanks. I was really ripping the 20x6.
That $100 could have helped with a new Laser to replace my 60 Extra! Snowdog has expressed some interest in parts thou so we'll see.
Til next months give away. Thanks for doing those, great fun and keeps people active.