B
Blucor Basher
Guys, the time has come to sell the previous 3DHobbyShop UberTrailer, since we now have an even bigger one.
The basic facts:
2010 Pace American V-nose enclosed trailer
30ft long box
7ft wide
Interior height floor-to-ceiling 76"
Dual 3500lb axles
Bumper pull via 2.5" ball
22,000 miles total
Electric jack
Spare wheel and tire
LED stop and marker lighting
The extras:
Dual RV-style awnings
Interior 110V lighting
Exterior 110V lighting
Clip-on metal charging table
Exterior charging outlets
Generator/storage area with dual doors
Walk-in door
Rear ramp door
Front dual ramp doors
Over-axle door
Fold down interior plane-transport racks
Checkerboard tile floor
This trailer was custom-configured for RC airplane use, although it would work well for motorsports. Fold out the awnings, clip on the removable charging table, plug your chargers in just below, and you have the ultimate fly-in setup. It will easily carry over a dozen giant-scale planes. If you have an RC-related business, there is room for a LOT of product along with displays and demonstration aircraft.
This trailer is currently in the DFW Texas area. We can discuss pickup vs. delivery based on your exact situation.
Total we have about $17,000 in the trailer, we're asking $9500.
The basic facts:
2010 Pace American V-nose enclosed trailer
30ft long box
7ft wide
Interior height floor-to-ceiling 76"
Dual 3500lb axles
Bumper pull via 2.5" ball
22,000 miles total
Electric jack
Spare wheel and tire
LED stop and marker lighting
The extras:
Dual RV-style awnings
Interior 110V lighting
Exterior 110V lighting
Clip-on metal charging table
Exterior charging outlets
Generator/storage area with dual doors
Walk-in door
Rear ramp door
Front dual ramp doors
Over-axle door
Fold down interior plane-transport racks
Checkerboard tile floor
This trailer was custom-configured for RC airplane use, although it would work well for motorsports. Fold out the awnings, clip on the removable charging table, plug your chargers in just below, and you have the ultimate fly-in setup. It will easily carry over a dozen giant-scale planes. If you have an RC-related business, there is room for a LOT of product along with displays and demonstration aircraft.
This trailer is currently in the DFW Texas area. We can discuss pickup vs. delivery based on your exact situation.
Total we have about $17,000 in the trailer, we're asking $9500.