Aerobeez 30cc 71" Extra 330SC

[afrye1]

thanks, ill get measuring, im worried about the hole where my throttle rod went through, pretty close to the y axis line

 

[afrye1]

did you use the 71.3mm from the factory motor measurements

 

[gyro]

did you use the 71.3mm from the factory motor measurements

Sounds about right, I don't remember exactly.

 

[afrye1]

so the 155 ztw can only handle 6s, so what are you flying with the 4330 if your flying 8s

 

[gyro]

so the 155 ztw can only handle 6s, so what are you flying with the 4330 if your flying 8s

ZTW 150a HV

 

[afrye1]

Is your watts to high with the 155, also is that motor ever to warm or does it run cool

 

[gyro]

Is your watts to high with the 155, also is that motor ever to warm or does it run cool

All Motrolfly motors run cooler than their competitors, it's something they're known for.

Also, on 6s at max power, amps are between 115-125, so the 155A handles it easy.

On 8s, the amps for the same power would be around 80-85A, so the ZTW 120HV is perfect, or an 80-100A ESC from another manufacturer.

 

[afrye1]

Is the 4330 400 kv compatible for 8 cell

 

[gyro]

Is the 4330 400 kv compatible for 8 cell

Only with a small prop... You can have them made to any kv wind you want, there is a pull down menu when ordering.

I think the 282 or 298kv is perfect for 8s depending on your prop preference.

 

[afrye1]

Okay , well I ordered the 4330-400 and 155 amp. I hope this will be plenty on a 6s