For Sale Aeroworks 30cc Edge 540 LPU/WS Rapid City, SD

[CASS]

Time for something different so I am selling my Aeroworks 30cc Edge 540. This is a great flying airplane and is currently set up for IMAC but could do 3D by changing the control throws and maybe the prop. Due to a bad throttle servo (now replaced) I had several dead stick landing one resulted in a damage landing gear mount. The mount was carefully rebuilt and reinforced with many flights after that. I will sell this several different ways from bare airframe to bind and fly (Spektrum receiver). I would prefer local pickup but may ship at the buyer's expense. The shipping box would most likely be 65X24X13 and weigh around 30# so you can figure the approximate freight, I will only charge what it costs me.


Asking price is $350 for bare airframe to $925 bind and fly, make a reasonable offer. As you will see by the list below I used only the best components to complete this airplane.


Hitec HS7985 on ailerons, elevators, and throttle

Hitec HS7955TG on rudder

Aluminum servo arms

OS GT33 with Vess 19A prop and aluminum spinner

2 Fromeco 2600 Lion Batteries

Spektrum AR7210 receiver

NIB uncut cowl

Side force generators

JR switches

Two voltage regulators

HD twisted wire servo extensions


Please contact me with any questions, thanks for looking

 

[Robbins]

hey CASS, give me a call 605 201 seven 913
i think i have a buyer for airframe and engine if that is something youll do.

 

[CASS]

hey CASS, give me a call 605 201 seven 913
i think i have a buyer for airframe and engine if that is something youll do.

Yes, I can sell just the airframe and engine, will give you a call tonight and we can discuss. Might even be able to meet around Murdo if your buyer is interested.

 

[Robbins]

Sorry I didn't answer my phone tonight. Was working on my huckfest plans.

Talked to my buddy and he is holding out for the Pau edge 30cc

I'd shoot you an offer of it was a 50ccer!

Thanks
Pat

 

[CASS]

Sorry I didn't answer my phone tonight. Was working on my huckfest plans.

Talked to my buddy and he is holding out for the Pau edge 30cc

I'd shoot you an offer of it was a 50ccer!

Thanks
Pat

No problem, I like the way it flies so I will just keep flying it until it sells.

 

[Kjetil Helberg]

Hello. Is this plane sold?

 

[CASS]

Hello. Is this plane sold?

No, I still have the airplane but I have removed all the hardware and it is just a bare airframe now, no engine, electronics, etc. The bare airframe is for sale.

 

[mjd123]

Time for something different so I am selling my Aeroworks 30cc Edge 540. This is a great flying airplane and is currently set up for IMAC but could do 3D by changing the control throws and maybe the prop. Due to a bad throttle servo (now replaced) I had several dead stick landing one resulted in a damage landing gear mount. The mount was carefully rebuilt and reinforced with many flights after that. I will sell this several different ways from bare airframe to bind and fly (Spektrum receiver). I would prefer local pickup but may ship at the buyer's expense. The shipping box would most likely be 65X24X13 and weigh around 30# so you can figure the approximate freight, I will only charge what it costs me.


Asking price is $350 for bare airframe to $925 bind and fly, make a reasonable offer. As you will see by the list below I used only the best components to complete this airplane.


Hitec HS7985 on ailerons, elevators, and throttle

Hitec HS7955TG on rudder

Aluminum servo arms

OS GT33 with Vess 19A prop and aluminum spinner

2 Fromeco 2600 Lion Batteries

Spektrum AR7210 receiver

NIB uncut cowl

Side force generators

JR switches

Two voltage regulators

HD twisted wire servo extensions


Please contact me with any questions, thanks for looking
View attachment 27957 View attachment 27958 View attachment 27959 View attachment 27960

 

[mjd123]

Is Edge still for sale?
If so e-mail me.

Thanks.

 

[CASS]

Is Edge still for sale?
If so e-mail me.

Thanks.

Yes, the bare airframe is still for sale with a lower price of $200.00 plus shipping.