Anyone flown or flying AeroBeez 50cc Edge 540?

[bob_nj]

I've come up with another question.

Is it necessary to reinforce the firewall with aluminum angle like so many other 50cc airframes?
Curious minds need to know...

 

[Bbcorvette18]

I've come up with another question.

Is it necessary to reinforce the firewall with aluminum angle like so many other 50cc airframes?
Curious minds need to know...

I dont know a single plane with aluminum angle and theres a few 50cc planes around here.

 

[gyro]

I dont know a single plane with aluminum angle and theres a few 50cc planes around here.

Most 3DHS 50cc birds do... It's not required by any means, but to some it's peace of mind.

 

[Bbcorvette18]

Most 3DHS 50cc birds do... It's not required by any means, but to some it's peace of mind.

or is that a testament to their design flaws? I've heard the 3dhs birds tend to be more fragile compared to other brands

 

[gyro]

or is that a testament to their design flaws? I've heard the 3dhs birds tend to be more fragile compared to other brands

Well, I think that is rather subjective. I've had decent luck with them... Only one random wing blown off

 

[3dNater]

I just helped with a pilot yak. It has aluminum angle.

 

[bob_nj]

Thanks for the replies.

I asked because the two Aerobeez Edges don't have any angle on the firewall.
I was hoping to hear from an Aerobeez owner/flyer for some experience with this design.

I'm still not getting email notifications and it's unnerving.


Take care
Bob

 

[Bbcorvette18]

Go into your control panel and look at your settings, Also be sure they're not going into spam

 

[bob_nj]

Headed that way...

 

[bob_nj]

All is well now, thanks!