Aurora 9X strange issue

[3dNater]

I have messed with trim steps... maybe it only changed for one rate?

 

[Xpress]

It may have done that. Try a new model memory, see what happens.

 

[Xpress]

Wellll?????????????

What's the word gents?

 

[3dNater]

I haven't had a chance to look at my planes this week...

 

[Patto]

Nor have I. Planning on trying this as soon as I can.

 

[Xpress]

I have some awesome news for you guys. We now have a new update for your HPP-22 that will update your 9X to version 1.02, which now lets you back up your models to your PC. Check it out!

 

[Patto]

My issue persists on other models. I found that I can move the stick slowly or quickly to its max and end up with different end points according to the monitor.

I've also found that my ailerons need to be retrimmed from time to time, and I can see before I take off that the left aileron is out of position when this happens. May be related, or maybe I have a servo that needs to be replaced.

 

[Xpress]

My issue persists on other models. I found that I can move the stick slowly or quickly to its max and end up with different end points according to the monitor.

I've also found that my ailerons need to be retrimmed from time to time, and I can see before I take off that the left aileron is out of position when this happens. May be related, or maybe I have a servo that needs to be replaced.

If the end points monitor shows you this, with another model even, then it's an issue with your Tx. My guess is it might be something up with one of the POT's inside of the Tx, send it into us and we'll take care of it. The aileron trim could infact be a servo, might want to try another one.

 

[Bipenut53]

Hi [MENTION=3822]Xpress[/MENTION] I have the Hitec Aurora 9 not the 9x, is Hitec still supporting that transmitter? I updated it last year along with the module and the receivers. I was crossing my fingers after I did it when I flew and it all turned out good lol.... Just wondering if I should be checking for another update or if they are done supporting it. Thanks!

 

[Xpress]

I have no idea why people say we aren't 'supporting' the A9, as long as we still sell it we still support it :thumbup: