3D EF 104 electrical

[Taildraggerrc]

You got 2! OCD is my middle name

14540=8293-image.jpg

 

[Jetpainter]

Great work guys. I've got a case of OCD when it comes to wiring as well.

 

[ghoffman]

With the snakeskin, I use a dab of Welders to tack the harness down in the corners up and out of the way.. If a repair or servo replacement is necessary, you just pull it up. A small dab of it is good enough that is never pulls up in flight but is still flexible. The ignition is mounted under the engine box hatch. It has a o ring under it for cushioning.

[URL=http://s67.photobucket.com/user/gshoffman/media/RC%20planes/F961BA82-3710-4FD5-98D0-2915E42E7A26_zpstesdu9qm.jpg.html]

 

[siko_flyer]

You can't see it in the pic I posted,but all my wires run through a couple of holes with grommets into the tunnel,so all are hidden.

 

[AEROSHELDON]

Looks great all!

 

[BalsaDust]

Very purdy work.

 

[ghoffman]

I revised the rudder linkage. The M3 flat hex head screws and nuts that come with Savox big servos work great on the links.

 

[ghoffman]

And here is where I located the BEC's, just under the 3s Lipos.

 

[Xpress]

[MENTION=618]ghoffman[/MENTION] what size packs are you running?

 

[ghoffman]

3S 1600's.