3D EF 104 electrical

[jhelber08]

15425=9148-20140826_145925.jpg

Here's a shot of my electrical on the ef 104. This was prior to mounting the rx batteries which I'm still playing with to get the CG I want. Right now they are strapped in right above the wing tube. I think you can also catch a glimpse of [MENTION=618]ghoffman[/MENTION] ignition plate as well.

 

[ghoffman]

They are 3S, 1600's, regulated to 8.5V by a pair of castle BEC Pro's.

 

[AEROSHELDON]

Dou you have deans in and then the two JR plugs out on the BEC Pro's?

 

[ghoffman]

No the 2 output leads are combined into one Deans. One Deans in, one out. It is not my idea, the Castle guy at the WRAM show suggested it. It works great!

 

[ericb]

Looking great. There are some great ideas here.

 

[AEROSHELDON]

Thanks! And you haven't had any issues with interference or otherwise?

 

[ericb]

ghoffman;15303 wrote: I revised the rudder linkage. The M3 flat hex head screws and nuts that come with Savox big servos work great on the links.

That is a great idea for those bolts. I have tons of those laying around.

 

[ghoffman]

None. I first used this setup on the 91 and it has been totally trouble free.

 

[AEROSHELDON]

Thanks!!!

 

[ghoffman]

Honestly I think Cody Wojcik came up with this idea.