Firewall paint, Rustoleum Hammered??

[Bartman]

Has anyone used Rustoleum Hammered silver spray paint for a firewall before? Everything has been sealed up with epoxy and sanded so I just need a nice top-coat for it.

Thanks!
Bart

 

[ChickenBalls]

Bart that will work. I used the Rustoleum Textured. Also use primer first, it will take less of the hammered to cover.

 

[Bartman]

OK, thanks!

 

[Bunky.F.Knuckle]

I prefer not to use any of that stuff, unless it is in a hatch. A light coat of grey primer, and a uber light coat of make it stone.

Just be sparing with the spray, otherwise, you will add some unnecessary weight. Unless you need it for ballast.

 

[Bartman]

too late! did a coat of silver rustoleum over the epoxy and then enough of the hammered silver to cover and have a consistent textured look

those globs of epoxy were in there from the factory, I probably should have carved them out.

 

[Pistolera]

Looks good Bart! Never used that stuff, but the freckled trunk paint from the auto stores works very well. Light coat of gray and then over spray with it.