Gas can all done..

[mustangman40]

Here is my new fuel can all ready to go for Harvest Huck in IA this weekend..:big dance:

Pretty happy how she came out, I will let you know how it works this weekend..

I didn't want any lines going into the cap, nice and easy to remix without fighting lines..

Power is a 2s 2100 life, nice and simple..:joyous:



If anyone is interested who has more money than time and would like me to make them one, let me know. I would be in the $160's + shipping for time and material..



Jimbo
16776=11642-IMG_20140910_095817104.jpg

16776=11643-IMG_20140910_095756227.jpg

 

[thurmma]

Nice and clean setup. I like it!

 

[Ant]

Not to put a dark cloud on you, but do monitor that pump. I have the same one and while it works well, I have noticed some gas bubbling from the output nipple where it attaches to the pump.

 

[mustangman40]

Ant;16793 wrote: Not to put a dark cloud on you, but do monitor that pump. I have the same one and while it works well, I have noticed some gas bubbling from the output nipple where it attaches to the pump.

Will do. Have you looked to see if there is a seal there? Might be a quick fix, I do see two screws there..

 

[Ant]

No, but I will do that tomorrow. I've pumped about 15 gallons through mine so far.

 

[angelob]

Looks good Jim...what fuel pump are you using? How fast does it pump on a 2s life battery?

 

[mustangman40]

angelob;16906 wrote: Looks good Jim...what fuel pump are you using? How fast does it pump on a 2s life battery?

I got it from Taildragger RC, heard a lot of good things about it.. It says 1000cc per minute..



Jimbo

 

[stangflyer]

mustangman40;16776 wrote: Here is my new fuel can all ready to go for Harvest Huck in IA this weekend..:big dance:

Pretty happy how she came out, I will let you know how it works this weekend..

I didn't want any lines going into the cap, nice and easy to remix without fighting lines..

Power is a 2s 2100 life, nice and simple..:joyous:



If anyone is interested who has more money than time and would like me to make them one, let me know. I would be in the $160's + shipping for time and material..



Jimbo
16776=11642-IMG_20140910_095817104.jpg

16776=11643-IMG_20140910_095756227.jpg

Niiiice set up. Great idea...

 

[Bipeguy03]

Nice clean set up!!



Here's mine, other than I don't have a Sig Gas Passer on it anymore I have a Facet Automotive pump.

16978=11682-10430384_711284948908646_1701334172294479698_n.jpg

 

[pawnshopmike]

Looks good Jimbo. Nice craftsmanship bro.