Gas engine in World Models 1/3 Scale S. Cub w/ no cutouts

[Dave1953]

Is there a gas engine that will work in a World models 1/3 scale Super Cub that you don't have to make cutouts in the cowling for the engine or at least only minor ones. I'm trying to get around cutting large holes for the heads. I see other 1/3 scale SC's like Balsa which have little or no cutouts.

Dave

 

[Bartman]

Used a slightly aged BME 102 in our 1/3 scale World Super Cub and the spark plug caps poked out a little bit

build thread
http://giantscalenews.com/threads/world-models-1-3-super-cub-project.4292/

photos of cowl
http://giantscalenews.com/threads/world-models-1-3-super-cub-project.4292/page-12#post-102309

 

[acerc]

Or go with a scale head sticking out, add some shrouds and away you go.
It can handle it,

.

 

[Dave1953]

Used a slightly aged BME 102 in our 1/3 scale World Super Cub and the spark plug caps poked out a little bit

build thread
http://giantscalenews.com/threads/world-models-1-3-super-cub-project.4292/

photos of cowl
http://giantscalenews.com/threads/world-models-1-3-super-cub-project.4292/page-12#post-102309

Advice noted. Thanks

Dave