GSN Product Review - The Soloshot2 Robotic Cameraman!

[49dimes]

Could someone post a picture of the "tag" device that goes on the plane or what is to be tracked. Please and thank you!

 

[ChickenBalls]

@49dimes check video about the 3:20 mark Sleepy has it(tag) in his hand

 

[49dimes]

@49dimes check video about the 3:20 mark Sleepy has it(tag) in his hand

Thanks!

 

[flycanic]

@49dimes. This will cost you a Cheeseburger LOL!! Here are a few shots of the tag I took a shot of it sitting by a servo so you can compare size

 

[49dimes]

@49dimes. This will cost you a Cheeseburger LOL!! Here are a few shots of the tag I took a shot of it sitting by a servo so you can compare size
View attachment 17418 View attachment 17419 View attachment 17420 View attachment 17421 View attachment 17422

Thanks for the good shots. Seems to be about the same size and weight of a servo. If we ever hook up Cheeseburgers on me!

 

[flycanic]

@49dimes Sounds great. You got the curiosity up on this old Catman. So I weighed the servo LOL!!! the tag is actually lighter

 

[49dimes]

@49dimes Sounds great. You got the curiosity up on this old Catman. So I weighed the servo LOL!!! the tag is actually lighter
View attachment 17423

LoL...

 

[rcbobp]

OK, let's talk about how you're setting the tag in/on your plane. The strap it comes with is a bit unwieldy. You could set it in the fuse with Velcro. That should be good for electrics, but the vibrations of a nitro/gas plane make the tag go bonkers and switch from Standby to Record. How would you strap it down on a piece of foam? Can't zip tie it, because you need to be able to remove it easily.

 

[pawnshopmike]

OK, let's talk about how you're setting the tag in/on your plane. The strap it comes with is a bit unwieldy. You could set it in the fuse with Velcro. That should be good for electrics, but the vibrations of a nitro/gas plane make the tag go bonkers and switch from Standby to Record. How would you strap it down on a piece of foam? Can't zip tie it, because you need to be able to remove it easily.

Strap it to the landing gear with a Velcro strap. Might add some Velcro to the back side as well to keep it from sliding around.

 

[flycanic]

OK, let's talk about how you're setting the tag in/on your plane. The strap it comes with is a bit unwieldy. You could set it in the fuse with Velcro. That should be good for electrics, but the vibrations of a nitro/gas plane make the tag go bonkers and switch from Standby to Record. How would you strap it down on a piece of foam? Can't zip tie it, because you need to be able to remove it easily.

Put a piece of foam under the tag then secure it with 3M clear packing tape. White Top side of tag up