Hangar 9 Ultra Stick 30cc ARF

[rmyers]

Well, this does weigh 2 pounds more than the US 120 Lite that I had the DLE-30 on. And with rear mounted servos, it should balance. I was thinking of the VVRC 40 twin, but the DA-50 is basically the same weight.

VVRC 40 on a Giant Stik flies great.

 

[AKNick]

Well, this does weigh 2 pounds more than the US 120 Lite that I had the DLE-30 on. And with rear mounted servos, it should balance. I was thinking of the VVRC 40 twin, but the DA-50 is basically the same weight.

I like the idea of the vvrc 40cc twin, hard to beat a da-35 as well... of course these are the higher priced engines. The twin would be easier on vibration with the supplied CA hinges.... just sayin. The vvrc 40 would be my choice.


Sent from my iPhone using Tapatalk

 

[ghoffman]

If I get one of these, I will not use CA hinges. I ended up having to replace them all with Robarts on the previous Stick, because they all ripped with only a DLE-30 for power.

 

[rmyers]

If I get one of these, I will not use CA hinges. I ended up having to replace them all with Robarts on the previous Stick, because they all ripped with only a DLE-30 for power.

I used Robart hinges on the Giant Stik. I just don't like CA hinges.

 

[payneaviation]

I'm going to use a RCGF 40 twin on mine as I got one in the box with no home

 

[ghoffman]

I read somewhere, the firewall is 110mm square. So I drew up the templates for DLE-35RA and DA-50 on the 110mm square. the first one is the DA-50.

 

[speed2004]

I'm thinking Tacon 160 ($60) and 8s power, 100/120 amp Castle ESC. Should be plenty of power. I fly a 1/4 scale Bravo on that setup and plenty of power