Taildraggerrc
70cc twin V2
Guys.
If your on the fence about jr dmss now is a good time.
http://www.taildraggerrc.com/jr-americas/
If your on the fence about jr dmss now is a good time.
http://www.taildraggerrc.com/jr-americas/
Jr americas 2 free receiver program
- Thread starter Taildraggerrc
- Start date
Bunky.F.Knuckle
150cc
Love my XG11. Only thing I would switch to is the 28X. You can do so much with the 11.
While Im down I should send both my radios in and have updates done to them.
While Im down I should send both my radios in and have updates done to them.
ryan_m
100cc
what updates are you guys talking about? Just the firmware updates? Those are definitely do-able yourself. I just took my XG11 from firmware revision 4 up to revision 13 last week. Easy process!
Here is the link that has the process documents:
https://www.jrpropo.co.jp/english/dl/details.php?hen=d0327
and the firmware itself:
http://www.jrpropo.com/english/dl/data/VERUP_XG11_0002-0013.zip
Make SURE you copy all your models to an SD card first. There are instructions for doing that above. It will wipe out the models you have. However as you bind the models to a slot, if you copy them from the SD card back to the same slot number on your tx after the upgrade, you will not have to rebind all of them. At least I didn't. And be warned, the copy to SD card process can take 20-30 seconds/model, so don't fret if it takes a bit. It's probably not locked up, just be patient.
Here is the link that has the process documents:
https://www.jrpropo.co.jp/english/dl/details.php?hen=d0327
and the firmware itself:
http://www.jrpropo.com/english/dl/data/VERUP_XG11_0002-0013.zip
Make SURE you copy all your models to an SD card first. There are instructions for doing that above. It will wipe out the models you have. However as you bind the models to a slot, if you copy them from the SD card back to the same slot number on your tx after the upgrade, you will not have to rebind all of them. At least I didn't. And be warned, the copy to SD card process can take 20-30 seconds/model, so don't fret if it takes a bit. It's probably not locked up, just be patient.
Bunky.F.Knuckle
150cc
I don't trust myself, that's why. Plus they will make sure it is 100% healthy too. But my 11X, it should be upgraded to DSMX. It will help its resale value, should I go to sell it.
I have one of the first XG11. It doesn't have XBUS programming in it.
I have one of the first XG11. It doesn't have XBUS programming in it.
jamesrxx951
100cc
If you update your XG11 that programming will include Xbus. I have been setting up a few planes on Xbus using my XG11 at first and now my 28X. programming is getting really fast and easy once you understand it.
Bunky.F.Knuckle
150cc
Limit is just that. It sets a percentage limit. You set your travel with travel adjust or more commonly called, ATV.
If you are binding at either travel limit, you may have to raise or lower your travel pepcentage to remove the bind. Unless you are reaching full travel at 1/4 or 3/4 stick. Then it is best to make pushrod adjustments. Also, make sure that geometry is the same, ie much like setting up ailerons or elevator travel.
If you are binding at either travel limit, you may have to raise or lower your travel pepcentage to remove the bind. Unless you are reaching full travel at 1/4 or 3/4 stick. Then it is best to make pushrod adjustments. Also, make sure that geometry is the same, ie much like setting up ailerons or elevator travel.