IMAC JTEC/ Radiowave 3.1m competition series

[IMAC FANATIC]

I built on a 8' x 4' table , you could get away with a little bit narrower table but to do two wings at once its necessary to have it bigger.
For the 3.1m that is.

 

[scruffmeister]

I built on a 8' x 4' table , you could get away with a little bit narrower table but to do two wings at once its necessary to have it bigger.
For the 3.1m that is.

Thanks. I'm going to need to build a new surface but I have the space in my workshop so that's good

 

[jtec/radiowave]

Other than an flat surface for the wings you could get away with a short one. the Fuse is all self aligning and interlocking so it builds straight.

Al

 

[oh58skid]

This is the table I built a couple of years ago. I can't remember the name of the material I made the top out of but it is 3/4 inch thick and has a smooth white surface top and bottom, I found it at Home Depot.

 

[Notorious B.E.N.]

The hard part in building is finding wood for the table that's straight enough so you don't botch the building of the plane.

 

[IMAC FANATIC]

No trophy, just showing a really really competitive weekend of IMAC. Every pilot scored over 900 in every keeper round. Amazing, last place but still extremely satisfied with the event.

 

[jtec/radiowave]

Brian,

That's great flying. Maybe next time you'll be on top!!

 

[Lojik]

@jtec/radiowave

What would a kit cost sent downunder?

I've been eyeing up this beast for a while now and seems like a great project.

 

[Kevin-Young]

@jtec/radiowave

What would a kit cost sent downunder?

I've been eyeing up this beast for a while now and seems like a great project.

Lojik, if you want to shoot us an email at sales@jtecrc.com with your address I will be more then happy to look it up for you.

Kevin

 

[Naughty Monkey]

And if the shipping scares ya, just remember, the quality will remain long after the cost is forgotten.