Limitless Aero Aeroplus RC 108" corvus racer build

[Rick dazzler]

That is a nice clean build...really like the spray painted motor box and clean minimal cowl cuts!

Thanks snowdog.. Actually I foam brushed the motor box...
When winter gets here I will be doing builds for hire if you know anyone ?

 

[Rick dazzler]

This is the fuselage next to my 50% pitts fuselage..
It is actually a bit longer!
Granted a pitts is a tiny airplane in full scale land..
Excuse my workshop its a mess :ashamed:

 

[KoleDeRacer]

Looking good chad, The corvus is a big and long 35% its hard to tell sitting next to older 40% which is which except maybe the slightly smaller wings.

 

[Rick dazzler]

Looking good chad, The corvus is a big and long 35% its hard to tell sitting next to older 40% which is which except maybe the slightly smaller wings.

Thanks kole she defiantly is.. I set it assembled next to my slick (a huge 35%er) and it dwarfed it almost

 

[Rick dazzler]

Got the cowl mounted again and pictured is my choke lever rod... Used a rubber grommet so the metal pushrod doesnt chaff the cutout..

Got the wings out.. Ailerons servo's next...

Here is a pic of her together. This is a HUGE 120ccer.. Should present well in the air

 

[gyro]

I want one.

 

[Rick dazzler]

I want one.

You would love it gary.. I'm excited to fly this one...
(sorry for the delay on the logo's) Lots of emails today... I need to pull the file off my computer in my shop it has no internet

 

[KoleDeRacer]

I realize i sell them, but i seriously love mine its the reason i started working with Aeroplus after he sent me the original one two years ago to try. Not to mention its tough as nails. Mid-airs with yaks 55s are no problem.

 

[Rick dazzler]

I realize i sell them, but i seriously love mine its the reason i started working with Aeroplus after he sent me the original one two years ago to try. Not to mention its tough as nails. Mid-airs with yaks 55s are no problem.

For sure it looks pretty tough..
One concern i have kole is the cowl openings on the cowl.. I' still scratching my head on the best way to baffle.. Are the opening's large enough?? As seen earlier in the thread I opened the can tunnel in front and the cowl has an air exit at the bottom.

 

[KoleDeRacer]

I cut mine larger....