Limitless Aero Aeroplus RC 108" corvus racer build

[Rick dazzler]

what about the forward air intake opening's?? Do you have a baffeling photo??

 

[KoleDeRacer]

I can get one. But basically i made the wholes larger while still keeping them round. Since its a once piece cowl my bafflers are fixed to the motor box

 

[Rick dazzler]

Well this was supposed to be a 2 day build!! LOL..
However I sold off some of my stashed trusty old servo's for some new savox 1283sg's
So in the down time I did get my aileron servo's and linkages set up.. I use the TDRC MPX harness's 12" rx side to 6"-20" wing panel side. Fit's purrfect!
Alos added some more hammered silver paint to the inside frame work were greasy hands at the field can touch.. Bling my friends

 

[gyro]

Well this was supposed to be a 2 day build!! LOL..
However I sold off some of my stashed trusty old servo's for some new savox 1283sg's
So in the down time I did get my aileron servo's and linkages set up.. I use the TDRC MPX harness's 12" rx side to 6"-20" wing panel side. Fit's purrfect!
Alos added some more hammered silver paint to the inside frame work were greasy hands at the field can touch.. Bling my friends

want to come build planes for me in San Antonio?

 

[Rick dazzler]

want to come build planes for me in San Antonio?

You paying for the airfare??

 

[gyro]

You paying for the airfare??

well damn... that kills it.

Nice work on the build so far!

 

[Rick dazzler]

thanks!

 

[Rick dazzler]

Still waiting on some servo's and gotta fix the hub on the eme...

Meanwhile I have been using our TDRC snakeskin (mesh) to route our 20 AWG servo extensions. This stuff is super expandable and I easily fot 2x 20 AWG wires through it.. After it is ran I use a little shrink tubing on the end..

Also I got a new Smart fly MICRO 12 from Rob.. Has all the features of the regular larger expanders in a tiny package... Love it!

 

[Rick dazzler]

Got my savox 1283SG servo's in today! Installed them within an hour LOL!..
These servo's are the best bang for the buck on a123 voltage.. Over 400 ounces of torque at 100.00..

Installed one on the rudder in the TDRC carbon rudder tray to keep the strain off the servo spline and more linear rudder, looks cool, and weighs nothing.. No mods what so ever to install this.. Drops right in the existing factory cut-out's. Also used the TDRC 3.5" dual alloy servo arm for the rudder arm to the tiller arm. These are great arms for the money. They fit TIGHT..

Put the other 2 on the elevators with TDRC servo arms..

Actually finished up the inside at the field and maidened it..
This is the most neutral flying plane I have flown yet.. And it FLOATS...
I was so comfortable I was doing aerobatics right off the runway from the start with a snap into KE..
After 2 minutes of aerobatics i proceeded to trim which required a few clicks..
I was torque rolling in the weeds within 5 minustes of the flight... Sorry for no pics but I will get some next time out and maybe a video..'I still need to do more for engine cooling the old chinatown 120cc was HOT after I landed...

 

[hone]

.....