NEED (4) Servos and Arms... 250 oz or ??

[SleepyC]

Ok guys, time to NALL is a ticking. The MKS rudder servo I bought at Toledo is AWESOME... the other (4) I put into the AIL and ELE.. not so much. They were digital prototype servos that never made it to market... and now I know why. the (2) are SLOW... and not smooth and the other two are fast but are like a ratchet. almost like there is only 20 points of resolution... SO BAD....

ANYONE have some servos and 1.5" arms they don't need they wanna sell for cheap? I have some Futaba Arms, and a few JR arms laying around. But I'll take any servos, as long as they are pairs.. (2) for the ELE and (2) for the AIL...

I'd just buy some new ones.. but I just don't have the loot right now.

Comeon, anyone upgrade to some monster 500oz jammers and have some old 250oz servos laying around?




If not.. I'll use what I got but.. they SUCK....

 

[Terryscustom]

These work very well, I've got quite a few of them now. I do drill out the metric binder bolt and use a 2-56 with a nut and some lock-tite just to get more strength.
Plus, taildragger freaky fast delivery: http://www.taildraggerrc.com/futaba-or-savox-1-5-alloy-servo-arm/

 

[Terryscustom]

I don't have any monster jammers but I do have 6 x Hitec 7954's and 1 x 7955 that are not used. The six 7954's each have a 2" SWB arm installed. Will sell cheap....make me an offer.

 

[SleepyC]

Terry "convo" me... I'm interested!!

 

[49dimes]

 

[Bunky.F.Knuckle]

I gots 2 MLP JR horns in 1.5" flavor. I drilled a hole in each on at 1.25" as I needed 2 at 1.25". Shoot me your mailing addy. Buy me lunch at the BG Extreme fest.

 

[emtp275]

Those 7954's on 2s will work really well for what you want them for, I use them as Im a weekend flyer and my own biggest fan.

 

[Terryscustom]

Four 7954's sent, LAW got them in the mail for me.

 

[SleepyC]

Yes thank you! terry had my back! Mucho gracias!