• If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!

Scale Need advice on Balsa 1/3 scale Super Cub build

D

Dave1953

50cc
Does anyone out there that has built a Balsa 1/3 SC and took photos of the build help me with step 10 on the wing build concerning the placement of the 5/16" X 3/4" X 2 1/4" spruce piece that glues to the spar ? I am legally blind and just can't see the "B-B" section on the wing plans good enough to figure out where this piece goes. Any help appreciated.

Dave
 
TonyHallo

TonyHallo

150cc
Does this help?
000_0359.JPG
 
D

Dave1953

50cc
TonyHallo said:
Does this help?View attachment 108094[/QUOTE
Are the two 5/16 X 3/4 X 2 1/4" size blocks referred to in step 10 glued on each side of the spar between the two metal straps that the struts attach to? In addition, how many of these "blocks" are supplied in the kit ? I have not removed all the parts out of the box yet and am having trouble locating them. The picture you posted is worth a thousand words and I can't convey how much I value you all help on this forum. I would be willing to pay for pics of the whole build but not all of them posted on this forum, literally !

Dave
Click to expand...
 
D

Dave1953

50cc
TonyHallo said:
My build thead is http://www.rcuniverse.com/forum/kit-building-121/4754623-balsa-usa-super-cub-build-3.html. All the photos and text provided. There are drawings, photos of the build, full scale reference photos, check it out.
Click to expand...

I have checked it out and it will help me tremendously but can you confirm that the aforementioned 2 1/4" spruce is glued to the spar on either side between the 2 metal straps? Remember, I am operating on about 25% of normal sight and blind in the other eye.
Dave
 
You must log in or register to reply here.
Top