If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.
We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!
no there is a little screw in Nipple that the black line fits over and the opening in it the tygon will slide right in it,, so what I did was Slide the tygon in, then cover the nipple with Seal All and then slide over the 1/4 fuel line and place the clamps on and it works perfect
it will empty the tank also.. but it will only run one way.. and I like it this way cause you never back wash your Filter. so here is how you do it.. where you tygon comes out of the can... you need to make a splice here. When it is time to defuel. You undo the splice and hook it up to the plane. Leave the fuel line that you would have used to fill the Tank. in the Cap of the fuel can and it will put the fuel back in the can
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.