• If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!

PAU Owners Thread

Terryscustom

Terryscustom

640cc Uber Pimp
Very nice guy's! I'm still trying to talk myself into a 222 for my Extra. Maybe next Winter, I'm also talking myself into doing a full scaled out re-cover as well:way_to_go:.

Little something I came across from last Sept. Skeeters were bad that night and I could still see my ignition light shining so we flew till we could not see and then we got foamies out!:
 
Bipeguy03

Bipeguy03

150cc
My 30% SP

1425545_760040380723665_3261117769770167359_n.jpg
10353046_760040247390345_6669065273189478935_n.jpg
10370961_760040574056979_2654629589037838153_n.jpg
10380982_760040447390325_1383842725476022841_n.jpg
10646766_760040220723681_5667587183289021912_n.jpg
10660159_760040367390333_8430910956889691102_n.jpg
10665881_760040530723650_131929926139547185_n.jpg
 
fencelake

fencelake

70cc twin V2
Hey everyone...

When I'm putting together or taking apart my 35% Extra 300, the wing tube is SO TIGHT that I have to push or pull to the point of almost crushing something. When I assemble the wings I can't get the second wing all the way in (about 1/4" shy of being flush inside it's pocket). Any suggestions for breaking in the wing tube and sockets?
 
Islandflyer

Islandflyer

GSN Sponsor Tier 1
fencelake said:
Hey everyone...

When I'm putting together or taking apart my 35% Extra 300, the wing tube is SO TIGHT that I have to push or pull to the point of almost crushing something. When I assemble the wings I can't get the second wing all the way in (about 1/4" shy of being flush inside it's pocket). Any suggestions for breaking in the wing tube and sockets?
Click to expand...
Also, please make sure the wing tube is no too long (we have seen a few wing tubes and stab tubes that were up to 1/4" too long.
Add up the width of the fuse, plus the two wing sockets. It too long, is can easily be cut with a dremel.
 
Phil.Griffin

Phil.Griffin

70cc twin V2
Islandflyer said:
Totally frustrating now: I was just advised that the latest container was flagged by customs for a full inspection.
Here we go again!!!
Click to expand...

I'll bet it's just a Customs Agent that flys RC, and wants to tell his buddies he was the first to get his hands on the new PAU planes..
 
You must log in or register to reply here.
Top