Pilot RC 107" Extra 330SC

[Terryscustom]

For you ZDZ-180 guys... I started out at 1-1/2 H and 1-1/2 L on the needles for my first flight. Now, after 10 gallons I'm at 1 and a 1/16 H and 1 and 5/16 L. So almost at the factory settings of 1 H and 1-1/4 L. Temp gun shows 170 average on landing. Same gun showed my DA-170 average 150F, but it had more elaborate baffle. Same gun temp'd my buddies DA 120 today at 250F on landing and that motor runs great, it's very reliable for 3D and XA (it has no baffling). Same gun temp'd my other buddies DA 120 with elaborate and ideal baffling at around 190F average on landing. All just for reference.

Good info. I'm pretty amazed at how the needles change in the first 3-4 flights. Can't wait to get more soon.

 

[Joe Hunt]

Got my pilot for my Pilot, today.

 

[Xpress]

Yo dawg, heard you like Pilot's, so we got you a pilot for your pilot so you can pilot while you pilot.

 

[Joe Hunt]

Yo dawg, heard you like Pilot's, so we got you a pilot for your pilot so you can pilot while you pilot.

I'd really like to put his head on a swivel and put that on a servo linked to the rudder. That would be so cool.

 

[49dimes]

Then your pilot would "rock" while piloting in your pilot whilst you piloted.

 

[Joe Hunt]

Then your pilot would "rock" while piloting in your pilot whilst you piloted.

True that! haha

 

[Naughty Monkey]

I'd really like to put his head on a swivel and put that on a servo linked to the rudder. That would be so cool.

Make sure you drill a pilot hole first.

 

[Joe Hunt]

Make sure you drill a pilot hole first.

Funny

 

[jhelber08]

I always drill pilot holes in the pilot and in the pilot when mounting the pilot to the pilot.

 

[Joe Hunt]

I always drill pilot holes in the pilot and in the pilot when mounting the pilot to the pilot.

And the beat goes on.... haha