Pilot RC 107" Extra 330SC

[Joe Hunt]

I'm really moving on this ARF now... I mounted the rudder servos. haha

I see Joe Smith likes the purple scheme too:

I am going to soak all the joints with thin CA because these planes are basically not glued together (just a little hot glue).

Still no 9380s (I have two for the elevators, though) so going with 9485s on the ailerons and rudder... 9360 on the throttle.

 

[pawnshopmike]

I love the purple/orange scheme. That is one awesome looking airplane.

 

[Joe Hunt]

I love the purple/orange scheme. That is one awesome looking airplane.

There's a new version with a red hatch and blue rudder.

 

[Jetpainter]

There's a new version with a red hatch and blue rudder.

Frankenstein!

 

[BalsaDust]

I love the purple/orange scheme. That is one awesome looking airplane.

Yes you do love purple and orange.

 

[Xpress]

Excellentness @Joe Hunt

What engine are you going with?

The 9485's are kinda somewhat similar to the 7955's, but they don't fade in torque like all coreless servos do. Either way, they are more than plenty for ailerons and rudder- Kim Quenette is using the 9485's on his EF 104" Extra ailerons he was flying at the fly in last month. As you can tell, they were more than enough

 

[pawnshopmike]

There's a new version with a red hatch and blue rudder.

MY EYES! MY EYES! ............That's harsh.

 

[Joe Hunt]

Excellentness @Joe Hunt

What engine are you going with?

The 9485's are kinda somewhat similar to the 7955's, but they don't fade in torque like all coreless servos do. Either way, they are more than plenty for ailerons and rudder- Kim Quenette is using the 9485's on his EF 104" Extra ailerons he was flying at the fly in last month. As you can tell, they were more than enough

I was going to get some more mph83t mIIs, but at the last minute I called Kim and asked him what he was running on his plane at the event. haha

 

[Xpress]

So that leaves the question of the engine @Joe Hunt

 

[Joe Hunt]

So that leaves the question of the engine @Joe Hunt

Joe Smith's GP-123 looks good in that video, but I have had a DA-120 sitting here NIB for a few months. I think I'm actually going to run stock mufflers for once. :O lol I have a Mejzlik 28-12 and a Menz 29-10 coming for it... what do you fellas think? This is my first DA-120.