• If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!

pull pull or push pull

Han

New to GSN!
Hello,

i am flying 100cc size plane 3D Style. Other than balancing the plane, Is there an advantage in using a rudder servo in the tail as push pull as appose to in the fuse as a pull pull or vice versa? Thanks for the feedback.
 
Pull pull is a little more involved to set up and get just right, cables stretch and getting them adjusted right, setting up the control horn geometry and such. Some people like the push pull because they think the servo is a little stronger in that setup and maybe a little tighter as far as linkage is concerned. I haven't had any problem with either setup or good enough to notice a difference.
 

edgewise

30cc
Pull pull is a little more involved to set up and get just right, cables stretch and getting them adjusted right, setting up the control horn geometry and such. Some people like the push pull because they think the servo is a little stronger in that setup and maybe a little tighter as far as linkage is concerned. I haven't had any problem with either setup or good enough to notice a difference.
Exactly....I second that
 
Prefer push pull as it seems stronger and at least like less parts that could fail... Usually wind up with batts in front of the wing tube as a result. :happy:
 
Top