• If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!
  • Unless you are a paid advertiser NO more posting advertisement in the individual vendor forums. You may post in the Manufacturer's Announcements section only but only ONCE a month unless your a paid advertiser.

Redwing RC Extra 330SC 50-60CC

cardenflyer

cardenflyer

70cc twin V2
Well, I have been waiting and waiting for these to come out. Finally talked to Tim (owner of Redwing RC) and the long awaited 50cc Extra 330sc are going to be on their way! :banana: I'm hoping to have mine by the middle of next week so I can get it done in time for the CornHuck!(June 26-29) The following is a list of equipment I will be using along with links as to where they can be purchased.

Airframe - Redwing 50cc Extra 330SC (Blue)
http://www.redwingrc.com/index.php?m...roducts_id=298

Engine - DLE 61
http://www.redwingrc.com/index.php?m...roducts_id=302

Servos - XQ4120
http://www.redwingrc.com/index.php?m...roducts_id=131

Redwing PowerBox (Yellow)
http://www.redwingrc.com/index.php?m...roducts_id=305

Xion 24-9 Prop
http://www.redwingrc.com/index.php?m...roducts_id=255

Redwing RC 9.9 volt LIFE batteries (did not see a link)

Taildragger RC extensions and components
http://www.taildraggerrc.com/

As soon as the powerbox and servos arrive from Redwing I will post a video on how the board works and why it is something that can help and benifet your set ups.

Depending on the time frame the build could get rushed for the big 4+ day event June 26, so please if I miss something on a post don't be shy and ask anything you need to know about any of the products.

Thanks for watching, happy flying,

Jake Fahn
 
SnowDog

SnowDog

Moderator
I'm eagerly awaiting mine too! Mind if we share a build log or would you prefer to keep them separate?
 
3dmike

3dmike

640cc Uber Pimp
Nice guys! It might really cool for you guys to share the log. I don't think I've seen that before!
 
cardenflyer

cardenflyer

70cc twin V2
SnowDog said:
I'm eagerly awaiting mine too! Mind if we share a build log or would you prefer to keep them separate?
Click to expand...

Yes, please share. Chances are mine will be way rushed since it is a must have done by the next 4 day event. So I basically have 2 weeks and a day before I need it finished and the kit is still across that very large pond. Might end up being a 2 day build, 1 day setting all the glue for hinges and such, the next night doing everythng else with a few people helping.

I am super excited. As soon as the electronics and motor show up, I will get some pictures up and I will be studying the power board to answer all questions asked.

Thanks,

Jake
 
SnowDog

SnowDog

Moderator
cool...I'm in the same....boat...strike that...plane ;) still waiting for the airframe...got everything else!

I was waiting for the plane to arrive to start the thread, but this works for me...the excitement is intense!
 
cardenflyer

cardenflyer

70cc twin V2
Yes, I was a little excited, been chomping at the bit since Tim told me which now seems like for ever ago. Now that I know it's close I spilled it.
 
gyro

gyro

GSN Contributor
SnowDog said:
Are you sure about the Life batteries you posted?



I'm not familiar with 9.9v LIFE batteries....?

I did find a link to these:

http://www.redwingrc.com/index.php?main_page=product_info&products_id=42

Which are the normal 6.6v LIFe batteries that I'm familiar with?

Were you reading the packs upside down? ;)
Click to expand...

My guess is he'll be using the 9.9v LiFe batts with the new 11.1v XQ-power servos:
http://www.redwingrc.com/index.php?main_page=product_info&cPath=3_6_31&products_id=134
 
cardenflyer

cardenflyer

70cc twin V2
You must log in or register to reply here.
Top