Servo torque

[yakken]

For exampe this servo torque in oz would be right around 118oz correct?

 

[Snoopy1]

Very difficult to read but if it is 7.5 kg-cm then it is 107.2 oz-In.
Hope that helps.

 

[yakken]

Its 8.5, when i first looked at it i was just converting kg which made it 299oz.

 

[Pistolera]

Yeah, you have to convert the kg/cm to oz/in.....not just the kg to oz. There are a number of conversion links on the Web.

 

[WMcNabb]

At 6V, and torque of 8.5 kg-cm, your conversion to 118 oz-in is correct.

 

[49dimes]

I thought you could just use a Multiplier of 13.8...........

8.5 x 13.8= 117.3 That's what I've been using and it looks to be close give or take.

My 3114's are 31kg and on the box gives both units of measure and it comes out the same ie 427oz.

 

[WMcNabb]

I thought you could just use a Multiplier of 13.8...........

Close enough! I'm lazy and let software do the conversion. Both Excel and Numbers have a function.

 

[Pistolera]

This one works well....

http://www.convertunits.com/from/kg+cm/to/oz+in

 

[49dimes]

This one works well....

http://www.convertunits.com/from/kg+cm/to/oz+in

Saved to my "favorites" bar...

 

[Xpress]

Typically you multiply the Kg/cm rating by 14. 8.5 x 14 = 119 oz/in.