Scale Stuka Ju87 100in wingspan

[Blazing Wings]

Horizontal Stabilizer glued into place. Worked on some other details as well. Everything is built, just detailing left and assembly before priming. I might add some scale details if time allows for it.

 

[Blazing Wings]

Working on the under carriage.

 

[Blazing Wings]

Scale work under carriage. This will be covered with vinyl fabric.

 

[Blazing Wings]

Gel coating the Stuka wings and horizontal stab.

 

[pawnshopmike]

Gel coating the Stuka wings and horizontal stab.

Slick! Nice job brother.

 

[Blazing Wings]

thanks

Slick! Nice job brother.

 

[TonyHallo]

Agreed, very nice. By the way what is that black wing leaning against the wall? Looks stealth?

 

[Snoopy1]

How do you gel coat after the wing comes out of the mould. I thought you had to gel coat the mould first and then layup the glass and epoxy over the gel coat into the mould

 

[Blazing Wings]

The wing in the back is a German Horten WW2 in 1/4 scale, 165in wingspan.

 

[Blazing Wings]

How do you gel coat after the wing comes out of the mould. I thought you had to gel coat the mould first and then layup the glass and epoxy over the gel coat into the mould

You are right, normally I always Gelcoat inside the mold, like with my P40 or Mig3.
However, I did not make molds for the Stuka. But it is not a problem to Gelcoat after the wing has been built.