Switches for 30cc to 50cc

[BalsaDust]

Ok just checked mine. With the nut backed off as far as it would go yet still having full engaugment on the threads it measured right at 3/32". Prolly can make it work in 1/8" though. Now one thing I have seen people do is to mount it just inside the fuse on a small piece of wood and have a hole in the side of the fuse just big enough for the pin to pass through.

 

[ericb]

Anyone that's using the Booma pin flag switch I have a question. Just looking at the pictures, I haven't bought one yet, it doesn't look like you could mount it in anything very thick. My fuselage is fully sheeted so it would have to mount into at least 3/32 if not an 1/8". The threads on the end don't look very long. What's been your experience with mounting it.

No problem on my installations. EF edge and Peak/ Acro Extra. Plenty of threads to mount in the fuse.

 

[ericb]

pics

 

[Jetpainter]

Thanks guys!

 

[Bunky.F.Knuckle]

http://www.taildraggerrc.com/jr-e-switch-failsafe-switch-with-deans-ultra/

 

[Xpress]

pics

Where do you fly that you require a an IP67 servo on your throttle linkage?

 

[ericb]

Where do you fly that you require a an IP67 servo on your throttle linkage?

Underwater

 

[ericb]

Where do you fly that you require a an IP67 servo on your throttle linkage?

It is the only hv servo the Hobby shop had when I needed it.

 

[Xpress]

@ericb Gotcha. Hey well at least you can float fly

 

[ericb]

@ericb Gotcha. Hey well at least you can float fly

If I crash in a lake, I need to go nose first.