• If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!

Scale Top Flite P-40 Build Thread

djjr

30cc
I did get the nut but i had to buy another becouse it was to big for my motor. I am still happy with the spinner even i pay 2 times the hobbyking price. Verry good quality. :)
 

Charles

70cc twin V2
I did have to rethread the nut i bought to 5/16 X24 UNF threads because it was threaded to 5/16 Fiine thread.
 

Charles

70cc twin V2
Thought i would post a cross section of the engine rcv_work.jpg
 

Charles

70cc twin V2
attached the simulated exhaust and they blended in real good with the carb adjustment and start access20150824_154439.jpg20150824_153212.jpg20150824_153157_resized_1 (1).jpg
 
Last edited by a moderator:

AKNick

640cc Uber Pimp
Your P-40 is coming together great!! I've been following this build, it's really looking like an airplane now!! Keep it up!
 

Charles

70cc twin V2
Ok finally got this motor dialed in again on the test stand and reinstalled in the plane. The carb needle was defective so had to use the needle from another carb to get it where it didn't come out of tune.20150917_182559.jpg It is going to be spinning a 13x15 3 blade prop.
 
Last edited by a moderator:
Top