Notorious B.E.N.
100cc
For sale is a TREX 600N LE that has been converted to flybarless using an RJX Head.
I have just finished going through this heli and checking everything. This included greasing the thrust bearings and checking all of the bearings for smoothness. I replaced the clutch and rebuilt the motor. I didn't use OS bearings in the motor and went with better ones. The engine has a new cylinder, piston, and ring.
The upgrades that I have for this machine are the G-Force frame brackets.
This heli has the following:
OS 50 SX-H
Curtis Youngblood MP 50 pipe (not the SB version)
Align 610's on Cyclic, 620 on throttle, and 650 on the tail
Perfect Regulator with glow starter
Gens Ace 1800 maH LiFe pack
Radix 600mm V2 blades plus RAIL 606's (I flew both)
RAIL 96mm tail blades plus 2 sets of Radix tail blades and KBDD tail blades
No receiver or flybarless unit is included.
I also have a lot of spares including two canopies. I'm getting away from glow just because there is not a whole lot that catches my attention out there so I'm including glow plugs. I also have a start shaft that I can include. I'm honestly selling this because I've had it for 5 years and it has run it's course.
This heli was last crashed in 2013. I cracked the bottom frame plate which was repaired with a carbon strip and JB Weld. It also scuffed up the canopy I was using at the time. There is also a small dimple in the pipe.
Price is $525 shipped anywhere in the USA. Paypal for payment please. Email is ben.beyer@gmail.com
I have just finished going through this heli and checking everything. This included greasing the thrust bearings and checking all of the bearings for smoothness. I replaced the clutch and rebuilt the motor. I didn't use OS bearings in the motor and went with better ones. The engine has a new cylinder, piston, and ring.
The upgrades that I have for this machine are the G-Force frame brackets.
This heli has the following:
OS 50 SX-H
Curtis Youngblood MP 50 pipe (not the SB version)
Align 610's on Cyclic, 620 on throttle, and 650 on the tail
Perfect Regulator with glow starter
Gens Ace 1800 maH LiFe pack
Radix 600mm V2 blades plus RAIL 606's (I flew both)
RAIL 96mm tail blades plus 2 sets of Radix tail blades and KBDD tail blades
No receiver or flybarless unit is included.
I also have a lot of spares including two canopies. I'm getting away from glow just because there is not a whole lot that catches my attention out there so I'm including glow plugs. I also have a start shaft that I can include. I'm honestly selling this because I've had it for 5 years and it has run it's course.
This heli was last crashed in 2013. I cracked the bottom frame plate which was repaired with a carbon strip and JB Weld. It also scuffed up the canopy I was using at the time. There is also a small dimple in the pipe.
Price is $525 shipped anywhere in the USA. Paypal for payment please. Email is ben.beyer@gmail.com
