3D Viper build log (maybe)

[daman691003]

Ya I just rather use hysol. More work time. C

 

[Terryscustom]

Ya I just rather use hysol. More work time. C

I'll post a link for where to start on the assembly instructions. With the CA you have all the working time in the world because the parts are pre-assembled, clamped and then glued. The glue is drawn in place with capillary action. I'll follow up with more detail in a couple hours.

 

[Naughty Monkey]

If you don't have micro balloons, baking soda does the same thing

 

[Terryscustom]

If you don't have micro balloons, baking soda does the same thing

Dang Monkey, from the back row dropping a knowledge bomb right there! Nice, and thanks......now I have to find some, glue something and break something to test it out.

 

[Naughty Monkey]

Cool, curious to see how it compares to micro balloons. I haven't used it for awhile, but I remember it kicks pretty quick. And if you change it out every three months, it will keep the plane smelling nice and fresh!

 

[daman691003]

So doing hysol as fillet should be fine too

 

[crashflow]

And it will put out lipo battery fires

 

[Jetpainter]

Dang Monkey, from the back row dropping a knowledge bomb right there! Nice, and thanks......now I have to find some, glue something and break something to test it out.

Terry, do you have any milled fiberglass you can test while your testing. We used to add it to everything for BVM jets years ago. I still use it all the time.
http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXK312

 

[Terryscustom]

I do, I buy it in bulk from fibreglast.com

 

[Fibertech]

Terry, do you have any milled fiberglass you can test while your testing. We used to add it to everything for BVM jets years ago. I still use it all the time.
http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXK312

It works just fine. Used it alot and also mixed with micro.