Wanted Wanted...G-26 Slimline or similar pitts style muffler

[Bartman]

Looking for a good used US made Slimline or similar pitts style muffler for a Zenoah G-26



Thanks!

 

[49dimes]

I got a custom made J-tec pitts on a V1 RCGF 26. I have it in the cub but am going to put a 4cycle engine on it.

If the bolt holes are the same you want it?

 

[49dimes]

Bolt hole centers are 32mm or 1.26". Just cover shipping if you want it. It was a freebee to me so paying it forward.

 

[Bartman]

Bolt hole centers are 32mm or 1.26". Just cover shipping if you want it. It was a freebee to me so paying it forward.

View attachment 102832

the holes on the G-26 are at 34mm or just over 1-5/16 so it probably wouldn't fit but thanks for the offer!

 

[49dimes]

the holes on the G-26 are at 34mm or just over 1-5/16 so it probably wouldn't fit but thanks for the offer!

Ok. Good luck finding what ya need.