• If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!

what size carbon prop

Patroller

70cc twin V2
bigblueswope;2787 wrote: Lots of people look at Falcon or Mej 20x8. I'm wondering how a 21x8 would spin on a 40.


I run the 21x8 mej on the VVRC 40. I like it very much for slow and medium speed aerobatics.
 

sparkx38

50cc
3daviator;2928 wrote: Stock exhaust? What are you running now?
J-Tech mid size pitts muff on the DA60 and Stock muffs on the DLE111. I have been running a Vess 24b on the 60 and Zoar 24 X10 on the 111.
 

Bipeguy03

150cc
sparkx38;8278 wrote: J-Tech mid size pitts muff on the DA60 and Stock muffs on the DLE111. I have been running a Vess 24b on the 60 and Zoar 24 X10 on the 111.


You've been running a 24x10 on the 111???????? 24 inch diameter is awfully small for a 111.
 

sparkx38

50cc
Bipeguy03;9762 wrote: You've been running a 24x10 on the 111???????? 24 inch diameter is awfully small for a 111.
LOL How bout a 28 x 10. Must have been a long day when I posted that. 24B or 24 x 10 on the 60.
 

Bipeguy03

150cc
Finally got to fly my Ultimate with the Falcon 27x10, I don't think I'll ever change props again.

Monster pull, not too loud, good speed, everything I wanted.



Guess the less flex than a wood prop of the same size makes a huge difference!! lol
 

stangflyer

I like 'em "BIG"!
Bipeguy03;13628 wrote: Finally got to fly my Ultimate with the Falcon 27x10, I don't think I'll ever change props again.

Monster pull, not too loud, good speed, everything I wanted.



Guess the less flex than a wood prop of the same size makes a huge difference!! lol


So you're saying the 27x10 Falcon CF on the DLE 111 is the way to go? I've been reading that a lot of guys are using the 28x10 and 29x10. What are your thoughts now that you've run that 27x10? Were you able to get any rpm readings? Are you running stock muffs or cans? My son has a 111 V3 he is putting on an Aeroworks 36% Edge 540T. We're figuring it should come in around 25 to 27 pds.
 
Top