ZDZ USA Is Bringing ZDZ Brand Back to the US! Whoo Hoo!

[Terryscustom]

Late and lame but what engine did Herve's have in it? @Terryscustom ?

DA120. Mine has a DLE120 that may get swapped out for either DA120. My green prototype has a very well broken in and super running DA100L.

 

[49dimes]

DA120. Mine has a DLE120 that may get swapped out for either DA120. My green prototype has a very well broken in and super running DA100L.

Thank you Terry.

 

[Lojik]

off topic but that Green Viper is HOT !!!

 

[stangflyer]

off topic but that Green Viper is HOT !!!

Ain't that the truth?! I have dreams over @Terryscustom planes.

 

[stangflyer]

Oh what the heck..... Big is Beautiful. LOL..... Lets just do what Brad does.

 

[Terryscustom]

Well, I decided that to get the most testing out of my ZDZ112 I'm going to install it in my 3DHS 108" Extra.

Sounds like there is a good chance I may be able to get my hands on it in time for CornHuck!!!!

 

[Terryscustom]

Wow, the website for the engines is really cool. You can download a 3D model in .pdf format and rotate, measure, etc!!! I was able to quickly verify that DA100 mufflers and headers should in fact be a direct bolt on:

http://www.zdz.eu/inpage/zdz-112b2rv-jchampion/

 

[Jetpainter]

That's pretty cool.

 

[49dimes]

 

[Terryscustom]

Just heard some sweet data on the 90 single today. I'm getting pretty pumped up for the 112 to try out. Next week I'm going to yank the 120 off my Extra and start to prep for the 112 so I can bolt it in and roll. With the 3D model on the website I should be able to get a quick bolt in. I just have not decided how I want to do the choke with the rear carb. I'm used to reaching in the front.

@Flyrcjoe I assume that it is cool to rotate the carb so the needles face down instead of up like on the website?