• If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!

Search results

  1. Bunky.F.Knuckle

    Extreme Flight Owners

    Gonna fly my Laser tomorrow, again. Haven't made any changes to it, since reducing the pack capacity. Servo horns will be next.
  2. Bunky.F.Knuckle

    3 blade props

    Mejzlik 25x12 or Air Models 26x11 will be your best bets.
  3. Bunky.F.Knuckle

    2014 Magnolia Arkansas Fy-Low-In Pics and coverage- Saturday!

    Totally agreed!! When I do restrain my airplanes with a neckstrap, I make doubly sure that I keep back pressure on my throttle stick. We bust jokes about his finger and such. No sense in getting all pissy and sad about it. Grin and bear it, take it on the chin and go on! :) Get back...
  4. Bunky.F.Knuckle

    let us talk about fuel tank clunks....

    WrongWay RC tanks all the way. Richard is a good friend of mine.
  5. Bunky.F.Knuckle

    2014 Magnolia Arkansas Fy-Low-In Pics and coverage- Saturday!

    So did one of my buddies. He had his airplane restrained with a rope, tied up to his workbench. Airplane rolled back, and the throttle advanced, somehow. He started it, and it lunged forward. Ripped off his right middle finger, just behind the first knuckle. This was a wood prop, not a CF...
  6. Bunky.F.Knuckle

    IMAC new to me dalton 260/300, just want to fly it!!!

    Never say never. If it can happen, it will happen. My D300 was 60 flights old when I bought it. It had a rough early life, and not much easier since then. It has sat for the past 2.5 years in my basement with no attention to it, after I finished recovering it. One thing happened to my D300...
  7. Bunky.F.Knuckle

    Os hyper 50 giving me a headache. Hope for some help.

    No fuel filter anywhere that is restrictive?? Header tank? Low needle? It is a cam style needle, is it set to 12:00 (parallel with the venturi)? High needle out 1.5 turns? If you have a header tank, try bypassing it, process of elimination. I had a brand new Hyper 50 in a Sceadu 50...
  8. Bunky.F.Knuckle

    Good prop drill bit

    I be ordering drill bits when I get home.
  9. Bunky.F.Knuckle

    IMAC new to me dalton 260/300, just want to fly it!!!

    Keeps the leaks inside the header. My flexy headers leaked from the first start up, so I found some high temp tape and installed 3 wraps around the flex section. So far so good.
  10. Bunky.F.Knuckle

    Good prop drill bit

    No doubt easiest method there with the CNC machine. But my concern is the coolant and the wood hub.
  11. Bunky.F.Knuckle

    Os hyper 50 giving me a headache. Hope for some help.

    Clean the carb out, and then replumb the fuel system. A little trick on setting the L needle is to hover it for 45 sec to 1 minute and land it, leaving the engine.run, and put a finger on the backplate. If you can hold your finger there for.longer than 5 sec without it burning, then you...
  12. Bunky.F.Knuckle

    Trailers... I wish I had done this.

    I didnt have $2Gs to spend on a Honda 2000W genny. So I bought the next best thing for the $$ I wanted to spend. :)
  13. Bunky.F.Knuckle

    Premium Lamp Oil @ 50:1

    I actually use tri flow on my boost tab hinges. It gives off a nice citrusy smell, and no screech when.I deflect my surface at 70*. :)
  14. Bunky.F.Knuckle

    Savox 1283 servo connectors

    If you so happen to plug the servos in backwards, dont sweat it. You wont damage anything. Just remember, the darkest wire is negative andthe orange wire is signal. :)
  15. Bunky.F.Knuckle

    Been working on my harriers... Question.

    Yup!! Just ask me! :)
  16. Bunky.F.Knuckle

    Helicoil to repair stripped muffler bolts

    You can do that. But since you are drilling and tapping anyways, why not just go up 1 size bolt. I have a tendency to torque my exhaust bolts too much, and I end up stripping the manifold. So, I just go up 1 size in metric. I have 1 engine here currently with 1/4-28 SAE bolts in it for the...
  17. Bunky.F.Knuckle

    3D A Red Aero RC 108 Corvus is born!

    A bit more work tonite. Just waiting for the motor mounts to show up. Then I can.finalize the canister install. Mine will run mufflers. 11854=5059-20140826_205120.jpg 11854=5063-20140826_205135.jpg 11854=5064-20140826_205221.jpg 11854=5060-20140826_211917.jpg...
  18. Bunky.F.Knuckle

    2014 Wenatchee Huckfest

    There is something seriously wrong with that pic. It is like some words on the shirts or something......
  19. Bunky.F.Knuckle

    Been working on my harriers... Question.

    I agree with all that! The throttle jerking is something I don't like hearing. Sounds like you have no control over the throttle, almost like you are trying to keep it in a hover or whatever manuever you are trying.
  20. Bunky.F.Knuckle

    Which Radio System Is Best?

    Kraft!
Top