3DHS 70" Velox

[Paulieb1979]

I was wondering who is using 1 or 2 servos on the elevators I order 4 hitecs hitec 5585's

 

[gyro]

I was wondering who is using 1 or 2 servos on the elevators I order 4 hitecs hitec 5585's

In electric, definitely one servo

 

[Paulieb1979]

In electric, definitely one servo

Thanks

 

[Paulieb1979]

I just received my APC props and they do not fit on the prop hub that came with motrofly motor. Do the props come in different sizes when the hub is concerned.

 

[gyro]

I just received my APC props and they do not fit on the prop hub that came with motrofly motor. Do the props come in different sizes when the hub is concerned.

No, you'll need a prop reamer to enlarge the hole to the size of the standard 8mm hub

 

[Paulieb1979]

I am really frustrated maybe I bit off more then I can chew, I drilled the holes as in an earlier for the motorfly 4325-425 post in this thread and the motor is way off from the cowl. there is no adjustment so I guess somehow I must redo the electric motor box or buy a new one. it needs to be spaced forward and up. forward I can see but up does not look possible.

 

[gyro]

I am really frustrated maybe I bit off more then I can chew, I drilled the holes as in an earlier for the motorfly 4325-425 post in this thread and the motor is way off from the cowl. there is no adjustment so I guess somehow I must redo the electric motor box or buy a new one. it needs to be spaced forward and up. forward I can see but up does not look possible.

View attachment 20001View attachment 20002View attachment 20003

Paulie, can you post a photo of the firewall without the motor on it for me to see?

G

 

[rcbirk21]

i did the same thing on my velox. had to leave the spinner off that i had for it with how off my drilling was.

 

[Paulieb1979]

here are the pictures. you have to follow there center because the center was cut out for the motor shaft hub

 

[Paulieb1979]

pics

sorry forgot to rotate the pictures