Rick dazzler
70cc twin V2
Well guys . Got some work done today on the new years break.. My new 36% sbach..
Ripped a wing off in a full trittle wall on my last one.. This is sbach 3rd attempt. LOL
Ripped a wing off in a full trittle wall on my last one.. This is sbach 3rd attempt. LOL
Joe's Dad
70cc twin V2
Glenn did a test on how well Turnigy batteries survives 32 degree temperatures (a.k.a. leaving them out in the cold). It made all his flights VERY short.So we put him in charge of hotdogs:
View attachment 4407
He is a good dog turner.
SnowDog
Moderator
I remember not keeping some packs warm, yeah, they didn't last long!
The hot dogs look good though!
-DJO
70cc twin V2
I'm rebuilding my 3DHS 41'' Edge! This time with the right sized battery so that I don't have to add weight and ruin its performance
Going to use a Park 480 motor, 40A ESC, metal geared servos, 11x5.5 prop, 1800 mAH 3S 25C battery (only 136 grams), and my new DX6i coming soon with a 6ch RX!
Should be lots of fun and I'm eager to get this one back up in the air
Dan
This time with the right sized battery so that I don't have to add weight and ruin its performance Going to use a Park 480 motor, 40A ESC, metal geared servos, 11x5.5 prop, 1800 mAH 3S 25C battery (only 136 grams), and my new DX6i coming soon with a 6ch RX!
Should be lots of fun and I'm eager to get this one back up in the air
Dan
gyro
GSN Contributor
I'm rebuilding my 3DHS 41'' Edge!
Going to use a Park 480 motor, 40A ESC, metal geared servos, 11x5.5 prop, 1800 mAH 3S 25C battery (only 136 grams), and my new DX6i coming soon with a 6ch RX!
Should be lots of fun and I'm eager to get this one back up in the air
Dan
Good luck with the rebuild Dan, let us know if you need any advice!
-DJO
70cc twin V2
You know I'll get lots of video...
in fact, I've already uploaded an update video on my YouTube channel about it. I've also got a jet coming in the mail, and a DX6i!Good luck with the rebuild Dan, let us know if you need any advice!
They've already been helpful over on the other forum!
What happened was I got out of FPV... almost, actually. I'm saving a few things to sell later
and I've made over $400 just from that. $235 went to the DX6i, the jet, and a new prop for my current plane, and then around another $120 just went to the electronics for my Edge, and I'm left with around $60... which sounds good to me!Dan
Last edited by a moderator:
gyro
GSN Contributor
Glad to hear that...